Viking Ignitor - Replaced one and now other doesn't ignite

I replaced an ignitor that wasn't working and used an aftermarket compatible unit. Replacement one work fine but now the other ignitor glows but doesn't light the burner.

Do these need to be replaced in pairs?

Thanks in advance!

via Viking Ignitor - Replaced one and now other doesn't ignite
by jackaninny

Thermador Oven SMW272 Won't Heat, Stuck on Preheat 100

Hello, I have a Thermador wall oven, I've followed a previous post on what appeared to be the same condition. The post is from a few years ago and is closed now. I've tried to follow the same steps to fix but no luck. Here is the condition and what I've tried.
I can turn on bake, the cooling fan comes on, preheat 100 comes on, I hear relays clicking, no heat. I turn on broil with the same results. I try convection bake, the cooling fan turns on and the convection fan turns on, the...

Read more

via Thermador Oven SMW272 Won't Heat, Stuck on Preheat 100
by jaks2144

I need help finding the model #

I have this DSC Commercial Range that I can not find the model # on. I need to order a conversion kit from NG to LP. Does anyone happen to recognize this unit?

via I need help finding the model #
by WILLBRITT

Dacor Range ER36D - Igniters not working (all of them)

Hi There

I was gifted a Dacor ER36D range and it has been fantastic to date.

That said, last night all six ignitors stopped working. This seems a bit strange and I am curious if anybody has experience addressing this issue. My limited research shows that there are 6 ignition modules supporting the burners, but it would be highly unlikely that all six would fault at the same time.

Could there be an inline fuse or something that needs replacing?

via Dacor Range ER36D - Igniters not working (all of them)
by Dan.w716

HBN8651UC/02 5 years Bosch Double Wall Oven Not Completing Preheat

I have a 27" Bosch Double Wall Oven that does not come up to set temperature. I replaced the temperature sensor, it is good. I tried to replace the control module, but the display will not come on with the new module. The only thing that works is the oven light. If I replace the old control module, all functions attempt to work. Is there an initialization sequence needed to get the control module to work? I've tried two new control modules with the same result.

via HBN8651UC/02 5 years Bosch Double Wall Oven Not Completing Preheat
by kgtaylors

Bosch HBL8451UC - replacing control board issues

I have a wall oven that was not getting to temp. Issue was not with the elements, as the clean function worked. I first attempted the clean the probe, that did not work. I called a service repairman who advised the control board and probe should be replaced. His quote was $500+ in labor, so I endeavored to attempt a fix myself.

I replaced the control board and the probe. I ensured the control board connections were correctly made (took pictures of the old board before installing the new...

Read more

via Bosch HBL8451UC - replacing control board issues
by joeltk

Thermador SEC301/BB 01 - error F34

Flipped the breaker and it came back.
But.
Years ago I cleaned the squirrel cage fan when we had the same code.
Wonder if it's time again and should I also replace the "sail" switch? If so, where would I find that in the single oven version?
And, might there be other bits that need cleaning while I have it out.?

Pretty sure I need to replace the door hinges too as the door won't close properly and I just put in a new fiberglass door seal.
Are they made by Nuova Star?

via Thermador SEC301/BB 01 - error F34
by fritz

Thermador double oven SCD302TP

Hi, my thermador double oven does not heat up past 120 degrees or so on the lower oven only in convection mode. Regular baking works. Also the self clean function doesn’t work on the lower oven. The upper oven works fine in all modes. Thanks!

via Thermador double oven SCD302TP
by Artesia