Lg electric range oven stopped working

The range was working fine until a few days ago. I turned the oven on bake and placed some chicken in the oven and within 5 minutes I heard a loud pop and the stove went dead. I checked the breaker and it had tripped. I reset the breaker and the counter top is working, but not the oven. Can someone please provide some guidance on what my options are? My son has a multimeter if one is needed. Thanks

PS: The model year of the range is 2009.

Eddie

via Lg electric range oven stopped working
by eddie57

FE710FDRS Samsung oven does not maintain set temperature

I have Samsung FE710FDRS range. We have an issue with the oven maintaining temperature.
1. Set the oven temp to say 400 deg. wait until the range beeps
2. Without opening the oven, re-enter the temperature the oven temp by turning off (clear) the oven and hitting bake again and setting 400 deg
3. (Problem 1) The oven display will show for example 325 and will go up slowly and beep again at 400 some minutes later.
4. (Problem 2) If you are cooking something that takes a long time like a turkey or pork leg, you can repeat this in the middle of the cooking cycle and find this issue as well

If we don't re-enter the temperature, the food is uncooked.

The oven has been like since we purchased it. My wife is very frustrated. We need to constantly monitor and adjust the temperature.
Appliance is under warranty. We have a repair person coming but claming that there is no problem (and he can not wait to see how temperature drops over 1 hour for example). Oven is designed that way... There is a different repair person coming later this week
If anybody has this or has any comments appreciate it. I would to know some good way to show the defect apart from having the repair person wait for 3 hours.

via FE710FDRS Samsung oven does not maintain set temperature
by Gabriel Arce

Samsung oven FE710FDRS doesnt maintain set temperature

I have Samsung FE710FDRS range. We have an issue with the oven maintaining temperature.
1. Set the oven temp to say 400 deg. wait until the range beeps
2. Without opening the oven, re-enter the temperature the oven temp by turning off (clear) the oven and hitting bake again and setting 400 deg
3. (Problem 1) The oven display will show for example 325 and will go up slowly and beep again at 400 some minutes later.
4. (Problem 2) If you are cooking something that takes a long time like a turkey or pork leg, you can repeat this in the middle of the cooking cycle and find this issue as well

If we don't re-enter the temperature, the food is uncooked.

The oven has been like since we purchased it. My wife is very frustrated. We need to constantly monitor and adjust the temperature.
Appliance is under warranty. We have a repair person coming but claming that there is no problem (and he can not wait to see how temperature drops over 1 hour for example). Oven is designed that way... There is a different repair person coming later this week
If anybody has this or has any comments appreciate it. I would to know some good way to show the defect apart from having the repair person wait for 3 hours.

via Samsung oven FE710FDRS doesnt maintain set temperature
by Gabriel Arce

FE710DRS Samsung oven heat failure

Greetings,

This 3-year old Samsung oven seems to have experienced a failure on the control board. there is a burned area where the red wire running from the terminal block connects to this particular component on the board. The plastic on this part has melted, causing the wire to dislocate and the circuit to lose continuity. I don't know the name of this component, but it is a blue plastic rectangular box labeled "KET 6" (image included)

this issue appears to be similar to a thread posted by Jekyl on 4-24-14, but it is unclear whether or not that issue was resolved. Samsung has been no help.

The range top works, but the oven does not. Bake and broil elements themselves both have continuity. does anyone know what this part is, what may have caused this failure, or if the entire control board will need to be replaced?

Thank you!

Ken

Attached Thumbnails

 

via FE710DRS Samsung oven heat failure
by swoop

LG Electric Range LRE30451SB/02 Oven will not maintain set temp

When using the oven I start the bake cycle to heat to 350. It reaches this temperature and gives off the 3 beeps to let me know it's there. After I place whatever item I'm going to bake in the oven the temp display will indicate the oven is still at 350 degrees however when I open to check a short time later the actual temperature in the oven is significantly lower despite the 350 on the temp display. I restart the bake cycle and the temp display then shows a temp anywhere from 100 to 300 degrees. Trying to determine what part is malfunctioning.

via LG Electric Range LRE30451SB/02 Oven will not maintain set temp
by rsprout

Samsung oven heat failure

Greetings,

This 3-year old Samsung oven seems to have experienced a failure on the control board. there is a burned area where the red wire running from the terminal block connects to this particular component on the board. The plastic on this part has melted, causing the wire to dislocate and the circuit to lose continuity. I don't know the name of this component, but it is a blue plastic rectangular box labeled "KET 6" (image included)

this issue appears to be similar to a thread posted by Jekyl on 4-24-14, but it is unclear whether or not that issue was resolved. Samsung has been no help.

The range top works, but the oven does not. Bake and broil elements themselves both have continuity. does anyone know what this part is, what may have caused this failure, or if the entire control board will need to be replaced?

Thank you!

Ken

Attached Thumbnails

 

via Samsung oven heat failure
by swoop

LG Electric Range LRE30451/SW/SB/ST Oven will not maintain set temp

When using the oven I start the bake cycle to heat to 350. It reaches this temperature and gives off the 3 beeps to let me know it's there. After I place whatever item I'm going to bake in the oven the temp display will indicate the oven is still at 350 degrees however when I open to check a short time later the actual temperature in the oven is significantly lower despite the 350 on the temp display. I restart the bake cycle and the temp display then shows a temp anywhere from 100 to 300 degrees. Trying to determine what part is malfunctioning.

via LG Electric Range LRE30451/SW/SB/ST Oven will not maintain set temp
by rsprout