VDSC485-6GSS Viking oven won't heat

Viking vdsc485-6gss. Bought it second hand and cleaned it up and converted from NG to propane. Love the size and space it has. Dual fuel is nice.
Now the issue...the right side(bigger) oven wont heat at all. Right side works. I proceeded to scour the internet for possible solutions before committing to a hefty service call. I replaced the front relay(lower right) with no positive effect. Looked at two relays on back of right side oven and they looked fine. Used multimeter to check the...

VDSC485-6GSS Viking oven won't heat

via VDSC485-6GSS Viking oven won't heat
by Mattman67

Viking oven won't heat

Viking vdsc485-6gss. Bought it second hand and cleaned it up and converted from NG to propane. Love the size and space it has. Dual fuel is nice.
Now the issue...the right side(bigger) oven wont heat at all. Right side works. I proceeded to scour the internet for possible solutions before committing to a hefty service call. I replaced the front relay(lower right) with no positive effect. Looked at two relays on back of right side oven and they looked fine. Used multimeter to check the...

Viking oven won't heat

via Viking oven won't heat
by Mattman67

HBL5451UC/02 Bosch oven not reaching desired temperature before preheat turns off

Our Bosch model HBL5451UC/02 (Convection and regular) oven does not reach desired temperature. It goes in Preheat mode and thinks it has reached the correct temperature but it is off by 100 degrees. I turn it up to say 400 and it reaches 300. I turn it up to 450 and it will eventually reach 450 but when I turn it down to 400 (desired temp) the temp does not go down. Temperature dial seems to not be working properly?

via HBL5451UC/02 Bosch oven not reaching desired temperature before preheat turns off
by gentz

looking for burner element repair

hi all,

I have about a 1952 RCA Estate electric stove.

The burners are perhaps unusual in having two loops or coils each. In other words each has 3 leads coming from it - common and 2 hot. I am guessing each one is 110 V.
Multimeter shows about 65 Ohms on one loop.

My problem is that one of the larger burners has one loop open. So it gets about 1/2 as hot as it might.

I am not having any luck finding replacements (no surprise) so I looking for a skilled person or shop who might...

looking for burner element repair

via looking for burner element repair
by Wachusett

Bosch Oven HBL5450UC/08 E115 Error Code

I have a 7 year old Bosch oven that has displayed a E115 error code twice in a row. The oven starts heating up and then it never stops eventually resulting in the error code. Based on responses to similar problems, I am thinking that I need to replace the control board. If someone could verify that this is correct it would be greatly appreciated. Thank you.

via Bosch Oven HBL5450UC/08 E115 Error Code
by Mike1088

Bosch HBL5450UC/08 E115 Error Code

I have a 7 year old Bosch oven that has displayed a E115 error code twice in a row. The oven starts heating up and then it never stops eventually resulting in the error code. Based on responses to similar problems, I am thinking that I need to replace the control board. If someone could verify that this is correct it would be greatly appreciated. Thank you.

via Bosch HBL5450UC/08 E115 Error Code
by Mike1088

Older Avanti ignition parts help

I've got a 24 inch Avanti, model # DG24CW-1. The ignitor is not working on the stove top or the oven. Any idea where I can get the part, #10160404? Or do you think it might be something else?

Thanks!
Travis

via Older Avanti ignition parts help
by tgr23