Dynasty DGRS-30-4 oven thermostat

I've got a Dynasty range, model DRGS-30-4. The oven keeps overshooting the set temperature, blowing way past it every time we use it. I want to replace the thermostat, but it's no longer being manufactured. Dvorson's, in California, seems to be the only place that has most parts for these (we've bought a couple things here and there from them over the years), but when I called them today they said that part is no longer manufactured by anyone and basically we're out of luck.

I don't want...

Read more

via Dynasty DGRS-30-4 oven thermostat
by friolator

Unknown knob

Its a 8 knobs Magic Chef stove from.the 50s and one knob its like a large square tray that you pull out anybody know what its that for?

via Unknown knob
by Jose Luis

SGM304 Dacor Cooktop Reinstalling Burner Nuts?

We have a Dacor SGM304 cooktop. Needed to pull off top to work on microswitch. Had the special tool and the brass nuts holding burners in place came off without too much of a struggle. When reinstalling, the tops on the burners ended up level with the top of the threaded burner tubes. It took two of us pushing down on the top and burner to start each brass nut. Was careful to make sure that the burners and top were positioned correctly. Any tips or tricks for next time?

via SGM304 Dacor Cooktop Reinstalling Burner Nuts?
by Tabernashjim

SGM304 Dacor Cooktop Reinstalling Burner Nuts?

We have a Dacor SGM304 cooktop. Needed to pull off top to work on microswitch. Had the special tool and the brass nuts holding burners in place came off without too much of a struggle. When reinstalling, the tops on the burners ended up level with the top of the threaded burner tubes. It took two of us pushing down on the top and burner to start each brass nut. Was careful to make sure that the burners and top were positioned correctly. Any tips or tricks for next time?

via SGM304 Dacor Cooktop Reinstalling Burner Nuts?
by Tabernashjim

Reinstalling Dacor Cooktop Nuts?

We have a Dacor SGM304 cooktop. Needed to pull off top to work on microswitch. Had the special tool and the brass nuts holding burners in place came off without too much of a struggle. When reinstalling, the tops on the burners ended up level with the top of the threaded burner tubes. It took two of us pushing down on the top and burner to start each brass nut. Was careful to make sure that the burners and top were positioned correctly. Any tips or tricks for next time?

via Reinstalling Dacor Cooktop Nuts?
by Tabernashjim

Storage Drawer Broken

So I have this VERY old Kenmore stove and the storage drawer is leaning down onto the floor in the back. Guessing there are rollers and or some kind of guides that must have broken or wore out. I need to repair this but not sure what all I need. Was looking on line for pics of one not broken but couldn't find anything. I did find a small parts pic but it's kinda hard to make out or see what parts are there. Anyone have a pic, or know what parts I need to get, and if they're still available...

Read more

via Storage Drawer Broken
by JNAPES

Bosch HBL8750UC/11 - Oven keeps resetting time display. Oven and microwave both work.

Bosch HBL8750UC/11 - Oven keeps resetting time display. Oven and microwave both work. Replaced the oven control module and still happened. Is this an appliance issue or power surge/electrical issue?

via Bosch HBL8750UC/11 - Oven keeps resetting time display. Oven and microwave both work.
by emhunt44