LDE4413ST- Ultra heat only works on levels 1 to 8

Good day everyone, I have issues with the UltraHeat of the front burner of our LG LDE4413ST Range. The UltraHeat (outside heating element) works fine from level 2 to 8, once the knob is moved to level 10, the outside element shuts off and only the inner element remains on.

Tech guy said it was either the control board or a connection under the element. But no clue. Any one has suggestions? Thanks!

via LDE4413ST- Ultra heat only works on levels 1 to 8
by txmalsb

Convection element not working in LG LRE3083ST

Convection element never activates in either Convection Bake or Roast mode. I am able to activate the element using the LG diagnostic utility so I know that the relay and element are ok.

The convection fan and both the bake and broil elements do activate in both convection modes.

Any thoughts are appreciated.

via Convection element not working in LG LRE3083ST
by adolimpio

Help repairing or finding replacement parts for a Unique (brand name) model UGP-30EOF1 over/range.

I own a Unique model UGP-30EOF1 oven/range. One of my burners on the range will not remain lit. I've replaced the thermocouple twice. And on the present thermocouple, I verified that it was putting out about 350 millivolts before I installed it, as recommended by the manufacturer. The burner flows gas great as long as you push in the valve. About 1 time out of 20, it'll stay lit on its own, but the other 19 times you're out of luck.

Now the manufacturer says I need to replace...

Read more

via Help repairing or finding replacement parts for a Unique (brand name) model UGP-30EOF1 over/range.
by txgp17

JENNAIR JES9800 CONTROL BOARD

Hi,
I just purchased a service manual for the range and it is from year 2006. My range was purchased in 2010. Is there a new version of the service manual? I am on my 3rd control board with first one replaced under warranty and would like to know what is the latest control board EOC-II or EOC -III nd the associated software version? My new control board shows no error codes and all panel buttons work, but the issue I am having is that the bake temperature is about 40F lower then it should...

Read more

via JENNAIR JES9800 CONTROL BOARD
by marty100

NXR Model #NK3611 won't ignite

Hi there. NXR Model #NK3611 won't ignite. Cleaned all areas and debris, cleaned surfaces and holes. Hear a few clicks then nothing but a gas smell. I did see a few glimmers of light but it never caught. All 5 other burners work fine. The one that doesn't work now is the one I use daily. Any ideas?

via NXR Model #NK3611 won't ignite
by lisasum

samsung nx58m9420ss/aa stove/oven gas valve question

This gas oven/range unit; the ovens bake not working. Igniter is in good condition. I have continuity across both bake and broil valve prong pairs and 120V across wire leads feeding both gas valves according what is turned on . Valve is listed for 3.03/3.3 vac ?? Can gas valve be defective even when have continuity across gas valve contacts ? Is the safety work from a photocell or continuity of a good igniter ? Could gas valve be defective even though there's continuity in coil of valve ...

Read more

via samsung nx58m9420ss/aa stove/oven gas valve question
by howie333

Avanti 20" electric range indicator light stays on dimly.

Bought a new Avanti 20" electric range for our small airbnb apartment. Indicator light for stove top burners stays on dimly all the time. Surface burners are not hot so I'm thinking it's more of a nuisance than a safety issue but since it's in an airbnb unit, we keep getting calls from our renters that they are concerned that it is a safety problem. When a burner is turned on, light goes full bright, so normal in that sense. It's a small neon, (I think), 220v light bulb. Avanti...

Read more

via Avanti 20" electric range indicator light stays on dimly.
by tomski71

Bertazzoni PROF366DFSXT Range Temperature too high

Hi

Bertazzoni PROF366DFSXT 2.5 years old.

Consistently running a high temperature. Both temp sensor probe and thermostat have been replaced

If you set to 350, the "dial" gauge showing the temp climbs to 350 then stops, but the oven continues heating to about 410 (confirmed with oven thermometer). If you adjust the temp higher the dial gauge jumps up to the actual temp the oven is at. Any help appreciated!

Thanks

Jake

via Bertazzoni PROF366DFSXT Range Temperature too high
by syncroand101

GE Double Oven Model #J780T3YE Serial #ZT010132F

Looking for information on GE Double Oven Model #J780T3YE Serial #ZT010132F trying to find hinge replacement for top oven.

via GE Double Oven Model #J780T3YE Serial #ZT010132F
by NeedHelp55

HBL5650UC/03 Bosch oven persistent resetting

Howdy Folks,
My Bosch HBL5650 oven is continually resetting bringing it into clock settings which must be configured for use. The oven is unusable. I found a similar thread

FIXED - HBL8650UC/10 Bosch double oven display keeps resetting

Our Bosch double oven display board keeps resetting and at first it would only happen once in a while but now it is happening all the time and it’s won’t let us cook. I’ve noticed that it also happens when you touch the “info” button. I have shut off the breaker for 30 mins in hopes it would...

www.applianceblog.com

The remedy on that thread recommended a replacement of the main control board. I replaced the control board twice now as I though perhaps my initial change was a bad board. (Bosch part number...

Read more

via HBL5650UC/03 Bosch oven persistent resetting
by DIYGuy88

All burners take very long to light even manually

My tenants told me that all 4 burners on the stove take a long time to light (30-60 seconds). This is the case both using the stove ignition and when using a lighter. The issue has been getting worse and it affects the burners they never use. There is no smell of gas while waiting for the burner to light. Oven works fine. Any ideas?

via All burners take very long to light even manually
by pdooley

Bosch HBL3350UC/09 oven says it’s preheated 75 degrees or more before it is

Hi all-

Back again. My Bosch wall oven is acting strangely, twice in the past couple months it’s said it preheated to set temp (400*) and in reality it never went past 150* measuring by a thermometer I keep inside. I reset the breaker and it started working again. Like I said that’s happened twice in 6 months, but I’m also noticing that everytime I turn it on it will say it’s preheated (beep noise) anywhere from 75-150 degrees lower than it’s set for, but does eventually continue to climb...

Read more

via Bosch HBL3350UC/09 oven says it’s preheated 75 degrees or more before it is
by Bepding

Dacor ER48DSCH/LP Baking Temperature Won't Regulate

The Issue - My Dacor ER48DSCH/LP dual fuel range large oven temperature won't regulate after installing a new bake element. When the oven is turned on and a desired temperature keyed in, the temperature climbs into the 500's. At that point I shut it down. There are no error codes and the small oven works fine.

Background - The range is about 11 years old and the original relay board was replaced by me about 4 years ago. The original one was sent out to be repaired but hasn't yet...

Read more

via Dacor ER48DSCH/LP Baking Temperature Won't Regulate
by doxiedad

Bosch HGI8054UC/06 Gas range burner screw

Hello All,

I wanted to replace the burners on the cooktop, since they were sort of discolored. Got new ones and while screwing one of the burners, I used too much torque and damaged the T20 screw-head; I am unable to get it out now. The ignitor is standing far too tall now to place the burner plate..Are there any instructions to remove the cooktop and access underneath to remove the screws. My first step is to try a damaged screw extractor. Assuming I get it out..each new screw is $16.00...

Read more

via Bosch HGI8054UC/06 Gas range burner screw
by carybimmer