Monday, May 22, 2023

Thermador Range PG364GLBS/03 not igniting or clicking

I have a 17 year old Thermador still in good condition. For several years it was harder to get the pilot on the range to light. The board was just changed to the universal because the oven would high up over 250 degrees and now the oven is working fine. Then now none of the ranges ignite. I had 2 tech look at the issue for the ignitor both side I need to replace the spark re-igniter BSH 00189010 but it's hard to get.

One tech tested the voltage output from each and it's getting current...

Read more

via Thermador Range PG364GLBS/03 not igniting or clicking
by anthonys650

Saturday, May 20, 2023

X304GGVX Bertazzoni Range Oven Door problem .

Hi, I have a 30" Range and recently have a problem with the oven door. When I close the oven door, the door shifts down( drops down) and makes a loud sound. It happens every time that I open and close the oven door. Anybody can help me with this issue? Thanks

via X304GGVX Bertazzoni Range Oven Door problem .
by alirezamaryam

Thursday, May 18, 2023

Bosch HGS7282UC/06 Oven Control Board Configuration Instructions

Can anyone point me to where I can find the TSB for a Bosch HGS7282UC/06 Oven Control Board (Display Module) Configuration Instructions please?

Or, if you have replaced this board, could you upload images of the instruction pages please.

Thank you in advance!

via Bosch HGS7282UC/06 Oven Control Board Configuration Instructions
by djcz

Sunday, May 14, 2023

What is the white paste where the coil touches the cooktop in an induction cooktop

Can someone tell me what the white paste is, where the coil touches the cooktop in an induction cooktop and what purpose does it serve?. This is a general question since the cooktops I have taken apart are similar. I'm curious as to if it is a vibration damper and may reduce a buzz that often occurs during operation. Thanks

via What is the white paste where the coil touches the cooktop in an induction cooktop
by EmAre

Saturday, May 13, 2023

Bosch PKN645E01/01 stovetop, single plate sometimes stops heating on low temperatures

Hi,

I have the following problem that is a bit particular:

The large circular dual ring plate sometimes (most of the time actually) stops heating about 10-30 seconds after initially turning it on. No error, simply stops heating. Turning it off&on again typically resolves the issue and I can cook without further issues. Sometimes this requires turning it off&on again 1 or 2 times more (again within less that 10-30 seconds).
This is only ever an issue at the start, if it has been on for > 2...

Read more

via Bosch PKN645E01/01 stovetop, single plate sometimes stops heating on low temperatures
by PeterM

Wednesday, May 10, 2023

GE Wall Oven JRP15WW3WW

Greetings,

I am helping my neighbor repair her GE JRP15WW3WW wall oven. It was manufactured in 1998, and from what my neighbor tells me, it probably hasn't worked for the past decade, possibly longer. She indicated that the oven started throwing multiple error codes after she used the self-cleaning feature, but she doesn't remember what the codes were.

My initial research on the JRP15 series of ovens made me aware that there are several design issues with this oven that make it prone to...

Read more

via GE Wall Oven JRP15WW3WW
by pqcracker

Saturday, May 6, 2023

Thermador SEC301BB/03 Squeaky hinges and door won't close

Squeaky hinges and door won't close. The OEM part is nla. However, even though most sites say it's a Bosch part, I know it is not.
Nuova Star SPA, Italy. 900001143, but I'm looking for the part equal on the Whirlpool parts site and can't find a cross ref.
The Bosch "OEM" part number is 00425990.
Anyone have an idea?

via Thermador SEC301BB/03 Squeaky hinges and door won't close
by fritz

Friday, May 5, 2023

Gas to induction and wiring

We want to convert our gas cooktop to induction. It's currently mounted above a gas oven. The gas stove is 120V but almost all induction cooktops are 240V. The current gas oven is 240V. Question is...with 240V already running to behind the oven (but the current stove plugged into 120V), will we need to run another line from the breaker box to get 240V for the new stove, or is the current oven line sufficient for both? I can't pull out the stove or oven (well, I fear causing a gas leak if I...

Read more

via Gas to induction and wiring
by flyfresno

Wednesday, May 3, 2023

Viking Broiler/Oven Lights and Goes Out Immediately

I purchased a Viking DCCG130 secondhand. It sat unused for approximately 6 months before installing it. The range works fine but the infrared broiler and oven have never worked. They each light with plenty of flame, but are extinguished within 3 seconds. Is this a fault of some type of flame sensor or thermocouples-type thing?

via Viking Broiler/Oven Lights and Goes Out Immediately
by WhyWontThisWork

Bosch Microwave HMC80252UC/01 - no power no lights but not blowing breaker

I have ordered the door switch kit as I want those on hand but could that be the problem given that there is no power at all to the front panel and oven light? I have reset the breaker but it seems fine.

via Bosch Microwave HMC80252UC/01 - no power no lights but not blowing breaker
by pogosenior

I’m looking for a range cooker buying guide.

I’m hoping to find a range cooker buying guide here as we are looking to update our kitchen. Does anybody have something that would help please?

via I’m looking for a range cooker buying guide.
by robmeercat

Tuesday, May 2, 2023

Dacor Double Oven Overheating - With great video and sound!!

Hey everyone,
My older house came with a Dacor double oven and has been working great for years. I also cant find the model number anywhere. Today we were using both the upper and lower ovens at the same time when the upper oven started making these sounds (PLEASE WATCH AND LISTEN TO VIDEO)... the control board was beeping with the error message and something else was making a grinding sound in the upper oven. The display read "L20 OVER TEMP" at the time. I was able to find a manual...

Read more

via Dacor Double Oven Overheating - With great video and sound!!
by gizmoduck

Sunday, April 30, 2023

Looking for Thermador cit36xkbb service manual

Hello,

I got a Thermador cit36xkbb from a customer that had it attempted repair by another service company. There are 48 induction coils so I am looking for the service manual and connectivity diagram to make sure it has been re-assembled correctly before starting to test the boards. Anyone can find that service manual? I have been searching and did not find anything.

Thanks!
Fred

via Looking for Thermador cit36xkbb service manual
by fred eric

Monday, April 17, 2023

Low broiler setting only works sometimes

I have a new Frigidaire electric range. Model number FFEF3016VB. The broiler works on high but not on low, occasionally it will work on low but most often it will not.

via Low broiler setting only works sometimes
by shelly23

Sunday, April 16, 2023

Dacor ECS130 Wall Oven Not Heating Up - trying to troubleshoot

Oven has been slow to heat up and would not reach temp for last few weeks - now there is no heat from either bake or broil elements.
I tried resetting the unit on the device with red button behind control panel and that did not help.

I checked the temperature sensor at room temp and resistance measured right at 1100ohm, so from what I read that is good. The
control panel and display work fine, the fan comes on, but the elements don't heat up at all (I can touch and they are cool).

It...

Read more

via Dacor ECS130 Wall Oven Not Heating Up - trying to troubleshoot
by JB1993

Dacor Gas Burner Base Seized Up

I am looking for advice on how to remove one of the burner bases on my Dacor gas cooktop. The ignitor needs to be changed on this particular burner, but the technician said that over time the heat from using the burner has made it impossible to remove, due to seizing up. The ignitor can not be changed without removing the burner base according to the technician.

I have applied some SeaFoam Deep Creep penetrating lubricant and let it sit for 48 hours, but the burner rings, which hold the...

Read more

via Dacor Gas Burner Base Seized Up
by CBL

Monday, April 10, 2023

Whirlpool Oven buttons not working gw397lxus06

Whirlpool GW397LXUS06 Accubake oven - started with some buttons not working- had a repair guy come out and said control panel needed replaced and gave me a very high quote. I bought a new control panel but had simular issues - all buttons are not working. I figured the only other thing it could be is the membrane with the ribbon wires and the buttons. I ordered a new one, installed it, same results - although there is so.e button action. If I hold the bake button down it goes to set...

Read more

via Whirlpool Oven buttons not working gw397lxus06
by milzticket

VIKING VGIC365-4QSS Burner Ignition Issues

Hello! I would be grateful for any assistance.

I have a VIKING VGIC365-4QSS, serial number R06150113261. It was made in June, 2001. Most of the parts are original.

I'm having a problem with the RANGE (oven is fine). Over the last few months, the burners have gradually not been lighting well. Only 2 burners out of 5 are sparking regularly. I replaced both spark modules, the one that lights the left 2 burners, and the one that lights the right two burners and the grill.

At first, I...

Read more

via VIKING VGIC365-4QSS Burner Ignition Issues
by kbleau

Wednesday, April 5, 2023

Bosch double wall oven HBL8650UC/10 serial 920500053 will not let me to bake or use the broil feature.

This double wall oven comes up with set the clock, after setting the clock it will go back to the same "Info" mode and will not let me to bake or use the broil feature. Even unplugging it didn't work. Bosch technical support will not help. Could someone tell me if it's the display board or the touch screen faulty.

via Bosch double wall oven HBL8650UC/10 serial 920500053 will not let me to bake or use the broil feature.
by Seap1970

Tuesday, April 4, 2023

HE Café Induction CCHS950P2M4S1 Range does not work

About every month, the range stops working. When I turn the knobs, the light around the knob does not come on, and the induction element does not start. After about a week, it starts working again. I bought it 11 months ago, and is still under warranty. However, they've been out twice and have no idea what is wrong as it returned to normal function by the time the tech shows up.

The oven continues to work throughout.

Anyone else have this issue?

via HE Café Induction CCHS950P2M4S1 Range does not work
by blackcat