samsung NE595R0ABSR OVEN won't heat up past 150 degrees

The oven won't heat up past 150 degrees when on the convection bake setting. It does heat up to desired temperature own the regular bake setting. Any help?

via samsung NE595R0ABSR OVEN won't heat up past 150 degrees
by TimmyD

Changing cooktops

Just purchased a new home with a 30" Electrolux Electric Cooktop and want to swap it out for a 30" Electrolux Induction Cooktop. It is installed in a Quartz island and so am concerned about the size of the cutout. The installation instructions indicate the dimensions for the Electric are slightly different than the Induction so am wondering if anyone has any experience with this sort of a swap and how critical the dimensions are. I am unable to measure the actual cutout as I'm in a different city.

Electric Width required 29 3/4" to 30"
Induction Width required 29 5/8" to 29 3/4"

Electric depth required 20 3/8" to 20 5/8"
Induction depth required 20 3/8" to 20 1/2"

It would seem that the depth shouldn't be an issue, but the width, assuming the hole is built to spec, could be out by 1/4". Anyone know how critical this could be?

Thanks in advance.

via Changing cooktops
by BillON1

Deepfryer frying itself !

I'm looking for some insight as to what may have happened to my Rival deep fryer, it's worked well enough for ten years, using it every two or three months for just a few small batches of fries, last time I went to use it there were no signs of power at all and looking at it's current condition I'm feeling lucky it didn't catch fire ! the fried wire goes from the timer to the temperature probe clipped to the heating coil, I'm just assuming it's not powered so I'm wondering why it got so hot, enough to even melt the solder. any ideas ?

Attached Thumbnails

   

via Deepfryer frying itself !
by pursang

LG Range Oven - Very slow to heat up

Hey,
Hello to all
We are looking for some advice. Our LG range oven LRG3093ST00 is giving us some problems.
Very slow to heat up..takes about 45 minutes to get to 300
We are getting the F11 error code occasionally

Trouble shooting I have done already:

• I have removed the bottom panel to expose the burner and the glow plug/ignitor
• Here’s what happens:
• I start the bake process
• I see the glow plug glow white hot
• It takes about three minutes and then the ignitor ignites strongly for about 3-5 seconds and then it dies down to barely lit

I guess my question is:
What components need to be replaced to resolve this problem

via LG Range Oven - Very slow to heat up
by davidleehall2

Maytag Range

Was cleaning oven today and the breaker kicked off. After resetting the breaker the oven will not come back on including the display area. I have power going to the range. Is there a reset switch or fuse in these units? Thanks for your assistance!

via Maytag Range
by iabc2012

LG Range Oven

Hey,
Hello to all
We are looking for some advice. Our LG range oven is giving us some problems.
Very slow to heat up..takes about 45 minutes to get to 300
We are getting the F11 error code occasionally

Trouble shooting I have done already:

• I have removed the bottom panel to expose the burner and the glow plug/ignitor
• Here’s what happens:
• I start the bake process
• I see the glow plug glow white hot
• It takes about three minutes and then the ignitor ignites strongly for about 3-5 seconds and then it dies down to barely lit

I guess my question is:
What components need to be replaced to resolve this problem

via LG Range Oven
by davidleehall2

Oven won't work.

The breaker popped the other day, I reset and then I heard a loud pop. The elements and sensor are good. I tested w ohm meter. What's next? Don't see any burns on control board or other wiring?

via Oven won't work.
by Tmkowalski