I recently purchased a used a Bosch HBN 655A oven after getting all hooked up when I go to push the set clock or to set timer when I press any of the + or - buttons to adjust the time nothing happens like those buttons are inop Also after using the oven once there is a heat button that illuminates when oven is preheating anyway after oven was off and cool the heat light is blinking real lightly any ideas please help thanks
We had a power outage and when we awoke our Thermador range PGR486GDZS/01 was blinking error code 22, which means bad control board. We ordered a new control board and installed it ourselves. We purchased it at appliancePartsPro because they send full instructions on what to plug where (since the board has changed in the 13 years since we purchased the range, it's not a straightforward plug for plug).
Now after installing the new board, we thought we did something wrong because after the oven got to 350 F the fans would turn on, BUT, the oven would shut down and we'd get error code 43, which means the cooling fans don't work. We were puzzled because, we had no problem with the cooling fans prior to the power outage and we could clearly hear both fans come on.
We called for a factory service tech to come out because we were stumped. Why were we now getting an error code, when you could clearly hear the fans come on? The factory rep took a look and noticed that the one of fans wan't running as fast as the other. The slower running fan was not running fast enough to push the sail switch on the fan (or maybe it wasn't doing it quickly enough). So now it all made sense (I guess, we figure the new board wanted that sail switch triggered faster than the old board). So, the good news was we had wired the board correctly, but the bad news was that Thermador has discontinued the that particular fan (00486894). I called three local parts places in L.A., I checked all I could find on-line, even eBay and Craigslist, but zip, nada, a replacement fan was not to be found.
Out of sheer desperation, stubbornness and refusal to buy a new range (I'm kinda used to this one and it SHOULD last more than 13 years, no?). I found a place in L.A. that would take the fan apart, clean it up and lube the ball bearings (there are three, I think the guy said). He did it in one day and charged a fraction of what the part would have been new. Yureka!
I was so happy with this result I actually made a YouTube, showing the fan at work, the sail switch moving and giving a plug for this guy/shop in L.A. because, as you can well imagine, I was a happy camper. I'm hoping this will be useful to someone else out there in the same predicament we were in; payin' it forward! :-D
Here are a list of resources, hopefully these will be useful to y'all:
Where we bought the board with install instructions.
A repair manual for this range, I found this online and saved it in google drive, it's attached to this post.
The Youtube of the fan running well and sail switch moving, we wondered exactly where it was and how it worked.
The shop in L.A. that cleaned up the fan and got it working again: Abco Electric Motors, 2743 N San Fernando RoadLos Angeles, CA 90065, (323) 224-9000
Hello,
I am having issues with my LG oven not heating up. The burners on top work fine. The oven I can set anywhere over 400 and it only heats up to 355ish. It is a convection and has just the one heating element on top. But I tried the broil option and it seemed to work fine. Any ideas? Thank you.
Hello,
I am having issues with my LG oven not heating up. The burners on top work fine. The oven I can set anywhere over 400 and it only heats up to 355ish. It is a convection and has just the one heating element on top. But I tried the broil option and it seemed to work fine. Any ideas? Thank you.
I have a Maytag electric double oven #CWE5800ACB which has been working fine. I had the oven baking at 425 for 2 hours. Then used the broiler for about 15 minutes. Oven started beeping and displaying error code F3. I needed to flip switch at breaker to shut the oven/broiler off as hitting the cancel button did not work. Maybe the oven overheated? No clue.
Several hours later, after oven cooled, I flipped breaker back on and immediately the broiler came on. I hadn't even turned the oven on at that point. Once again, I turned off at breaker as pushing cancel did not work to turn the broiler off. Tried once again the next day and same thing happened.
I understand that it could be the temp sensor but why would a faulty sensor make the broiler come on when not selected to do so. Or, when the oven hasn't even been turned on yet. I'm thinking this has to be a really expensive job if I call a repair person? Can anyone help?
My oven is not holding temperature very well. It heats up fine but then if you cancel and re-set the temperature it is often 75F or more below the setpoint and thus causing inconsistent baking times. I've confirmed that the sensor is working properly with an ohm meter - any other suggestions on what to check next?
My oven is not holding temperature very well. It heats up fine but then if you cancel and re-set the temperature it is often 75F or more below the setpoint and thus causing inconsistent baking times. I've confirmed that the sensor is working properly with an ohm meter - any other suggestions on what to check next?
