Wednesday, December 30, 2020

P36S328BP Peerless Pro gas oven slow to heat and then under temperature by 75 degrees

I have a Premier Pro gas range (by Peerless Premier) that I am told was manufactured in 2005. In the past couple months the amount of time it has taken to get up to temperature has increased. I've worked around it by setting the temperature dial 75 degrees above the temperature I want and it makes it there in 35-45 minutes (so still not ideal, but faster than the hour plus it was taking). About a week ago, I wanted it at 350, so I set it to 425 and it stayed at 350 for 2-3 hours while we...

Read more

via P36S328BP Peerless Pro gas oven slow to heat and then under temperature by 75 degrees
by Barbwoodco

Tuesday, December 29, 2020

Premier Pro gas oven slow to heat and then under temperature by 75 degrees

I have a Premier Pro gas range (by Peerless Premier) that I am told was manufactured in 2005. In the past couple months the amount of time it has taken to get up to temperature has increased. I've worked around it by setting the temperature dial 75 degrees above the temperature I want and it makes it there in 35-45 minutes (so still not ideal, but faster than the hour plus it was taking). About a week ago, I wanted it at 350, so I set it to 425 and it stayed at 350 for 2-3 hours while we...

Read more

via Premier Pro gas oven slow to heat and then under temperature by 75 degrees
by Barbwoodco

Monday, December 28, 2020

VDSC487-4G QS Viking oven not working

Electric primary oven range is not working. On this Viking Stove I have replaced the thermostat and I have also replaced the main bottom burner. And still no luck.
This problem was noticed after a self-cleaning. Late at night when the oven was not being used we may have heard a loud pop.
Anyone have any other suggestions?

via VDSC487-4G QS Viking oven not working
by WGallup

oven door not sealing tightly

The door on our Jenn-Air (made by Maytag apperently, per the model # tag) is not sealing tightly.
reading up here (and elsewhere) it seems that the #1 cause of this problem is tired door hinge springs?
before I drop $75 on a pair of new hinges, I thought I would just double check that diagnosis here (on the only appliance repair source that I trust.)

is there something a fresh spring hinged door should do (like snap crisply closed the last inch) that I can test that mine is NOT doing...

Read more

via oven door not sealing tightly
by pjstock

Sunday, December 27, 2020

Viking oven not working

Electric primary oven range is not working. On this Viking Stove I have replaced the thermostat and I have also replaced the main bottom burner. And still no luck.
This problem was noticed after a self-cleaning. Late at night when the oven was not being used we may have heard a loud pop.
Anyone have any other suggestions?

via Viking oven not working
by WGallup

Saturday, December 26, 2020

Gas maytag oven delayed ignition, failing to stay at temperature

I see the glow ignitor turn on after turning on the oven, but a majority of time it goes off before the gas valve opens maybe 10 to 15 seconds. My guess is the glow ignitor is bad but I want to be certain before purchasing. My other thought is if the gas valve thermal coupling is going bad...I was wondering if the glow ignitor is on a timer and is expecting to ignite the gas but if the gas valve is failing to open in time the whole sequence could be failing. How long is a glow ignitor...

Read more

via Gas maytag oven delayed ignition, failing to stay at temperature
by Jahonesz

Broiler element remains on during bake cycle on Dacor DR30DIH/NG

I recently replaced the broiler element on my Dacor DR30DIH/NG. The "broil" cycle now works as expected, but unfortunately now the broiler element never deactivates during the "bake" cycle. So, the oven gets way hotter than the selected temperature.

Note that the "pre" indicator turns off and the system beeps as expected when the selected temperature is reached, but the broiler element continues to glow and the temperature in the oven continues to increase (the display indicates that the...

Read more

via Broiler element remains on during bake cycle on Dacor DR30DIH/NG
by RimasR

Thursday, December 24, 2020

SGSX305TS/03 Thermador Cooktop Locked Burner Nut

I had someone come by to install some burner parts. He rounded one of the burner hold down nuts. Its brass I think. How do I get it out and where can I find a replacement?

Thanks!!

Added complete model number

via SGSX305TS/03 Thermador Cooktop Locked Burner Nut
by slackkeymike

Thermador Cooktop Locked Burner Nut

I had someone come by to install some burner parts. He rounded one of the burner hold down nuts. Its brass I think. How do I get it out and where can I find a replacement?

Thanks!!

via Thermador Cooktop Locked Burner Nut
by slackkeymike

Monday, December 21, 2020

Bosch wall oven HBLP451LUC/03 - missing cable harness

This is a rather odd scenario, our Bosch wall oven stopped working completely, display panel did not light up at all, we were using the oven for a few hours baking cookies and it just stopped. Service person was sent out from Bosch not under the warranty as we were technically just outside of the year based on delivery date though we didn't move into the new remodel until months later. He confirmed power was supplied but said that both the display and control unit needed to be replaced. I am...

Read more

via Bosch wall oven HBLP451LUC/03 - missing cable harness
by mhoch

Thursday, December 17, 2020

Propane cooktop - one burner randomly goes out

I have a five burner GE cooktop that runs on propane. 4 of the burners operate just fine, but front left middle sized one does not. Maybe 70% of the time it works completely fine. But the rest of the time it has some odd behaviors. Sometimes it extinguishes a few seconds after lighting. I relight it and sometimes it is fine, and sometimes it goes out a few more times before it stays on. Other times, after being on for a little bit, it'll change from a smooth even flame to a noisy...

Read more

via Propane cooktop - one burner randomly goes out
by BlueWRXPride

Wednesday, December 16, 2020

WOC95EC0AS03 Baking Oven Bulb

My Whirlpool Combo oven (WOC95EC0AS03) has a burnt out bulb in teh backing oven.I am trying to buy a replacement from Amazon but i am not able to find the correct size of teh bulb. i have tried multiple bulbs ,the base is either too small or too large. I got the part number WPW10412711 but its close 25$ for just the bulb. Can anyone help me what is the size of the bulb so that I can order on amazon.
Thanks
AD23B998-2081-4BDF-8A5B-EC5ED26CBE79.jpeg

via WOC95EC0AS03 Baking Oven Bulb
by kalla

Monday, December 14, 2020

HBL5651UC/01 Bosch Oven Error code E115

I have had my double oven lock out 3 times. The temperature control would be suspect. What should the ohms read on this part to confirm it is defective?

via HBL5651UC/01 Bosch Oven Error code E115
by Dogly

Friday, December 11, 2020

Jenn Air Wall Oven JJW9530DDS extremely slow preheat

Jenn Air 30" Electric Wall Oven JJW9530DDS takes extremely long (60min+) to pre heat. I have the oven apart and have checked the temperature probe, all three elements, high temp limiter. I have gone into test mode to test each element and they all activate and work as expected. The issue seems to be during the actual preheat cycle. The system activates the bake element for 20s and the broil element for about 40s which seems backwards. Neither element seems to get very hot during this...

Read more

via Jenn Air Wall Oven JJW9530DDS extremely slow preheat
by BCCoastal

Kenmore Induction Stove DANGER! Fire Hazard!

My wife was up at 6 am and heard the stove Beep she then noticed the two left stove top elements were powered on to the PB setting. Fortunately there were no pots or metal on the cooksurface as the elements were both "Live" and would have heated and metal on the surface. She then had me look and l saw the same, putting a pot of water on the element it would begin to heat up. Turning the control and the temperature settings were all working but could not be shut off.
I pulled the breaker and...

Read more

via Kenmore Induction Stove DANGER! Fire Hazard!
by wind_rose_2

Monday, December 7, 2020

GE model ZET958SM1SS

Started upper oven and it was working. Tried to start lower oven and it not only didn’t start but it shut down upper oven. Control panel when blank. Tried to restart upper oven and the panel goes blank once you hit the “start” button.
Definitely something associated with lower oven cause this issue. Help. Jeff

via GE model ZET958SM1SS
by JeffKowal

Sunday, December 6, 2020

MCS130S Dacor oven doesn't heat even though heating element is good

Hi, I have a 7 year old Dacor Millennia wall oven (Model number MSC130S) which my wife tells me takes too long to heat up.

Broil element glows red, but not the bake element. Bake element measures 25 ohms, and appears to be in good shape. Volt meter on the wires which connected to the back element before I removed it seems to transition between 4 and 40 volts.

Recommendations? Thank you

via MCS130S Dacor oven doesn't heat even though heating element is good
by NotionCommotion

Friday, December 4, 2020

simmer

manual says i can use simmer with the element set on lo-4. what happens using simmer with higher settings (5-hi)?

via simmer
by perk1329

10431-2 Moffat electric range Replacement thermostat for 20-yo elec range?

The oven went out on my circa-1999 Moffat electric range. (Moffat is a member of the GE brand family in Canada.) With "bake" selected the oven warms but does not heat and the indicator oven light doesn't activate. With "broil" selected the indicator light comes on, but zero heat.

Am I right to diagnose this as a failure of the 3-wire thermostat?

Anyone have advice on an affordable replacement part? The original part -- GE WG02F05823 -- appears to no longer be available.

Whirlpool part...

Read more

via 10431-2 Moffat electric range Replacement thermostat for 20-yo elec range?
by pfairley

Replacement thermostat for 20-yo elec range?

The oven went out on my circa-1999 Moffat electric range. (Moffat is a member of the GE brand family in Canada.) With "bake" selected the oven warms but does not heat and the indicator oven light doesn't activate. With "broil" selected the indicator light comes on, but zero heat.

Am I right to diagnose this as a failure of the 3-wire thermostat?

Anyone have advice on an affordable replacement part? The original part -- GE WG02F05823 -- appears to no longer be available.

Whirlpool part...

Read more

via Replacement thermostat for 20-yo elec range?
by pfairley