Thermador bad Board Error code 22 leads to Cooling Fan Error Code 43 & discontinued fan 00486894 FYI

Thermador bad Board Error code 22 leads to Cooling Fan Error Code 43 & discontinued fan 00486894 FYI

Hi DIYers!

Posting this for posterity.

We had a power outage and when we awoke our Thermador range PGR486GDZS/01 was blinking error code 22, which means bad control board. We ordered a new control board and installed it ourselves.

We purchased it at AppliancePartsPros because they send full instructions on what to plug where (since the board has changed in the 13 years...

Read more

via Thermador bad Board Error code 22 leads to Cooling Fan Error Code 43 & discontinued fan 00486894 FYI
by 91030Mom

2007 kenmore pro double oven 79042003600

double oven.top oven works perfectly. turn bottom on to bake and set temperature just bounce around .set to 400 and temp wil read 300 then 450 then 300 etc

via 2007 kenmore pro double oven 79042003600
by jfromtn

Oven not getting to temp

Hey, I have an oven here that is about 50 degrees off. Control board reads 350 but the actual temp hovers at about 300.
Spark ignitor works. Oven turns on as it should just doesn't get up to temp after the initial preheat. Temperature probe ohmed out at 1100 at room temp. At 300 degrees it ohmed out at 1600.
The tech sheet available was the French version. Not fluent...
Wondering if this unit can be calibrated?

Thanks

via Oven not getting to temp
by Mcnabb75

Hidden bake element replacement

I purchased a new baking element for my samsung range. It is a hidden one. I followed all directions and removed the old one. It was in 2 pieces. Now I cannot put the new one in as there seems to be an obstruction in there. I could see just a bit through opening and appears to be a flap of metal stopping it.

via Hidden bake element replacement
by deaise

Viking Oven Short-Cycling

We just purchased a new VGIC53626BSS 36” Viking Open Burner Gas Range / Oven in early October.

We didn’t use the oven much until Thanksgiving at which point I noticed that once it was up to the desired temp it would turn off (light and everything) and then about 30 seconds - 1 minute later it would it would ignite and fire up again. We timed it. It’s happening consistently every 30-60 seconds. So 60-120 times in an hour.

It’s cooking everything okay but it’s really annoying and seems like...

Read more

via Viking Oven Short-Cycling
by EMay

Bosch HDI8054U Not completing preheat

My Bosch HDI8054U is not heating fully to temperature. The preheat indicator on the display goes to the last bar then never completes. I have checked the temp in the oven with a digital thermometer and it seems to stall around 300 F. Where should I start troubleshooting? Thanks

via Bosch HDI8054U Not completing preheat
by ajack

Thermador cmt 21 temp selector dial bulb replacement

Temp selector dial is held on shaft by plastic clip. How do I remove it with out breaking plastic clip to replace light bulb

via Thermador cmt 21 temp selector dial bulb replacement
by cv36h

Thermador Range PRDS30 Simmer Burners Stopped Working

The two simmer burners on my Thermador range stopped working. No gas. No spark.

So I sent the simmer controller to a company called fixyourboard.com. For $150 they repaired the board.

I reinstalled the controller but the simmer burners still don't work. No gas and no spark.

Assuming the controller is now working, where do I look next? Thanks for the help.

via Thermador Range PRDS30 Simmer Burners Stopped Working
by blacter

GE JGSS66SEL3SS Oven Gas Leak

I have a six month old range. Gas supply line installed professionally and no leaks at gas valve or connection to stove. I can use top burners fine. When I use the oven there is a noticeable gas smell after several minutes. Oven will preheat fine, but as it continues the gas smell begins to build as the unit cycles to keep temp or increase temp. Anyone walking in the house would say there’s a gas leak. I got a combustion meter, and it shows no leaks anywhere in the supply connections or at...

Read more

via GE JGSS66SEL3SS Oven Gas Leak
by Boxwood2021

Help with Miele Steam Oven

I just bought a house with a 30" Miele steam oven (model #H6780BP) installed in 2018. I was trying to cook a turkey for Thanksgiving and an audible alarm went off every 5-10 minutes the entire time the turkey was cooking (2+ hours) saying it couldn't connect to the probe (which was properly installed in the turkey breast according to the manual), then "Please insert probe", repeating the entire time. I called Miele tech support this morning and the tech support person simply said they...

Read more

via Help with Miele Steam Oven
by mitchellch

Viking Home Professional Oven

HELP...The oven on my stove doesn't heat. Originally thought it was the ignitor/gas pipe because when it was working you could hear it kick off and with the slap of the hand under the oven it would light up again. When I pulled the pipes, one had rotted through. I replace both pipes and both ignitors and fired it up. Same thing. So I tapped on the gas control valve as it was exposed with the front of the oven off, and again, both pipes lite up. Ok, now I order a new gas control valve. Just...

Read more

via Viking Home Professional Oven
by MikeIsBadAtGolf

Kitchenaid convection oven issues YKESA907PS00

The oven has quit working on all settings and I need some help troubleshooting the issue. When I select bake or broil, the bake/broil elements will turn on for maybe 10 seconds and then shut off and will not turn on again until I unplug the oven and plug it back in. Then they will work for 10 seconds again the next time I try. The convection element does not heat and has no power on any settings. Likewise, the convection fan does not get power.

I'm wondering why the elements work briefly...

Read more

via Kitchenaid convection oven issues YKESA907PS00
by Fixitup

Whirlpool oven over heating

I replaced a broken baking element it had burnt out I put a new one in that I got from Amazon and now the oven overheats too much so I bought a thermostat and it's still over heating I'm wondering if it is because of cheep eliment I'm hoping it's not my control panel..... any thoughts

via Whirlpool oven over heating
by Yardman

Control Problem with Thermador wall oven

Hi, I need some expert help. I've serviced my own oven for many years having done the dim display fix, re-soldering blown joints on the relays and replacing the built in microwave. But this time it has me really stumped and I need some help with the electronics because I don't know if I can even find these control boards for sale any longer on the 14 year old oven.


I have run the unit in the self test mode and everything works as expected, the cooling motor comes on when it is...

Read more

via Control Problem with Thermador wall oven
by dmalsan

Thermador Cook Top- Quick Question

Hi I was wondering for Thermador SGSX365CS/02 is it safe to substitute another gas tube 0208 for the 0201 tube- here is diagram- page right one time https://www.thermador.com/us/suppor...02#/Tabs=section-spareparts/Togglebox=tb0201/ ? They have the same thread size/ connection, may have to bend slightly to make it fit back left burner as it is the tube for the front right burner. Also, should I use thread sealant or is ok just to screw the tubes on snug for the...

Read more

via Thermador Cook Top- Quick Question
by 5craw

GE profile PGS930SEL2SS does not maintain temp

Title says it... I just got a 2 year old used PGS930SEL2SS and the oven does not appear to work correctly. When set on bake or convection bake, it appears to reach temperature during preheat. After preheat the temp appears to drop based (food not cooking... Oven thermometer already ordered to validate). If I cancel the oven function and turn it back on, it displays a much lower temp and starts preheat again.
Ex set 400, preheat done, 20 mins later, turn oven off, turn back on to 400, oven...

Read more

via GE profile PGS930SEL2SS does not maintain temp
by bagel

Bosch HBL8750UC/11 - Oven keeps resetting time display. Oven and microwave both work.

Bosch HBL8750UC/11 - Oven keeps resetting time display. Oven and microwave both work. Replaced the oven control module and still happened. Is this an appliance issue or power surge/electrical issue?

via Bosch HBL8750UC/11 - Oven keeps resetting time display. Oven and microwave both work.
by emhunt44

Thermador PRG304

Hi All,


Recently purchased a Thermador PRH304WH all GAS Range. I have a few questions for someone with this oven.


How Long does it take for Oven to reach set temp. Mine takes 20mins to reach 375. Lower element only fires up regardless of what setting I choose. (Except BROIL which works perfectly)


The oven has a ROAST Setting: Owners manual says it should cycle between lower and upper heating elements. Mine does lower element with Convection Fan running ( the one inside the oven is...

Read more

via Thermador PRG304
by Luca

Bosch Oven Control Board Replacement

I have an older Bosch 800 series single wall oven that has been malfunctioning. The oven greatly overshoots the set temperature no matter the mode it is set. I had a repair service come look at it and they felt it could either be the temperature sensor, bake element, or control board, however, they quoted me $1,000 for these repairs. While I am not the most handy guy, I figured that I could make these repairs for a lot cheaper. I replaced the temperature sensor and still had the issue. I...

Read more

via Bosch Oven Control Board Replacement
by Jross4

SJK340BP01 Premier and Summit ranges?

General question-- We need to buy a 24" gas range. Premier and Summit appear to offer some decent ones at a reasonable price, but I am not familiar with these brands. Any counsel on the source or reliability of these brands?

via SJK340BP01 Premier and Summit ranges?
by Vintage

Ge oven trouble

I have a ge propane cooking oven 31786641P001.

I do not know how these work but it acts like the thermostat is gone. It was on 400 degrees and the internal temp was 550. It has done this before but it's intermittent.

How hard are these to fix? Is it a sensor or likely a computer problem. Expedited replies appreciated.

via Ge oven trouble
by Semerm12

BOSCH Electric Free Standing Range

I called Bosch to get a replacement KNOBS, part Number 00603902, which I am told is discontinued. But try #00754386 - repair kit. Bosch rep told me there is no image and if i purchase it and return it, there is a 25% restocking fee.

Does anyone have leads to how I can find these replacement parts?

via BOSCH Electric Free Standing Range
by tulleigh

Thermador downdraft button rarely works

I have a thermador downdraft that I'm afraid to lower as the last time we lowered it, the downdraft almost didn't come back up! I believe I need to replace the control knob. Can anyone point me towards the correct part to order and a video on how to replace the control knob?

via Thermador downdraft button rarely works
by jborn

Thermador Cooktop

My thermador cooktop is starting to have problems igniting the gas. I'm guessing it's a problem with the ignitor, because out of the 5 burners the one we use the least lights up just fine. What is the ignitor part I need to order and is there a video showing how to replace it?

via Thermador Cooktop
by jborn

Dacor RSD30 oven cooling fan

I am trying to get to where the cooling fan is installed, I cannot find anything online, diagrams, anything so that I can disassembly my stove to replace the cooling fan. Help!? I need to know WHERE the cooling fan is, and how to access it.

via Dacor RSD30 oven cooling fan
by SheilaNEEDShelp

HDI7282U/09 Bosch dual fuel range- oven not working after electrical storm

Bosch dual fuel range- oven not working after electrical storm. One red light on control panel.

The control panel on my bosch dual fuel (electric convection oven - propane top burners) does not work after a bad electrical storm. Power supply to outlet good (240). Tried 15 minute reset at breaker box, changed the display/control panel out for a new one. One lone red light is shining on the lower left quadrant of the digital touchpad control display.
Electronic ignition for gas burners is...

Read more

via HDI7282U/09 Bosch dual fuel range- oven not working after electrical storm
by bsperling

Emprava gas cook top

New Emprave Gas cooktop from Home Depot. Its a inexpensive cooktop, seems to be well made and looks great. However after I light the burner(s), gas flow goes to minimum. I guess until the thermocouple warms up it keeps gas at minimum, safety thing. The problem , it takes sometimes takes 5-7 minutes before I can adjust the gas higher. Its every burner and the little sensor is right in the flame. The instruction book is lacking, and I haven't received a response from the manufacturer. I...

Read more

via Emprava gas cook top
by Miami

Bosch 2019 HGI8056 Error Code 0001

Hi,

A couple months back the front panel popped up some other error code so I popped it open, disconnected and reconnected wires, entered service mode, cleared error and we were good. Fast forward 2 months, we now have a new error code E0001 which is supposedly a mismatch between control module and front panel and it's supposed to be resolved by entering into the service mode (enter+1+bake). I first repeated the original steps but I'm not able t enter the service mode. I found my way to the...

Read more

via Bosch 2019 HGI8056 Error Code 0001
by netjack

Thermador Double Oven - Broiler comes on randomly during bake

I am having an issue when I am baking, the broiler elements come on. Sometimes this happens after the oven is on for a while and sometimes is starts out this way. I believe if I change the oven to broil and back to bake, it will fix it. I can't tell if this is a relay issue or a control board issue? or something else..

Thanks

via Thermador Double Oven - Broiler comes on randomly during bake
by bkahn

Noice when igniting

My oven is making a really loud noice evry time it warming up/igniting

via Noice when igniting
by Moshie11

HBLP451LUC Bosch wall oven control panel stops working everytime there's a power surge

Problems with my Bosch wall oven control panel/keypad:
Repair man has been called out 4 times in less than a year, each time for the same problem (I go to use the oven and the keypad and/or control panel buttons don't respond when pressed). 1st two times they replaced the entire control panel. 2nd and 3rd times the repairmen turned off the power in the house and turned it back on and the oven worked fine.

They told me they don't know why this happens but they suspect it's happening...

Read more

via HBLP451LUC Bosch wall oven control panel stops working everytime there's a power surge
by Koremins

JennAir Cook Top - All knobs ignite the same burner.

My son just recently purchased a home with a Jenn-Air Cook Top #JGD8130. It's four-burner top,we have no history on the problem. Burner #1 works fine, gas flows, ignite lights fine. The issue is with burners 2,3 & 4. When the knobs on 2-4 (values) are turned, gas flows properly, but the ignite on #1 is activating. 2-4 igniters aren't coming on, but all make igniter #1 spark.

via JennAir Cook Top - All knobs ignite the same burner.
by ltaluccifixit

Gas range oven bottom stuck trying to check igniter)

Any suggestions to get an oven bottom out that appears to be stuck?

We have a Kenmore Elite gas range. The igniter appears to be gone (bake function stopped working, now broil). We’re trying to take out the bottom to check the igniter for the bake function but it doesn’t want to come out as easily as YouTube videos show the panel doesn’t seem to be able to slide out past the frame lip. It seems our only option at this point is to crowbar the frame lip (damaging the oven) or buy a new...

Read more

via Gas range oven bottom stuck trying to check igniter)
by Andersenclan

Strange top burner issue when oven is on

I have an issue where when the oven is on and after it has warmed up, the inner burners behave strangely. This doesn't happen when you turn the oven on cold and then immediately turn on a top burner. It goes away after the oven is on for about 10 minutes.

It is basically the same problem as this youtube except for me its the inner burner. The outer burner behaves mostly normal, but seems maybe a bit more agressive. The inner burner appears starved and sometimes is completely out, but also...

Read more

via Strange top burner issue when oven is on
by jtvt

Bosch double oven HBL8650UC/07 - Stuck to broil on Bake

I have a double ovens Bosch HBL8650UC/07. Bottom oven works fine. But last week upper oven began to heat only with broil element even when on Bake. Whatever heat selections on upper oven (bake, convection bake ...), broil element starts to maximum.

I am planning to remove oven from the wall to make diagnostic and repair it. But before removing it, is anybody had the same issue and what was the solution to fix it (is it bottom element of upper oven, control board, probes in upper oven?)...

Read more

via Bosch double oven HBL8650UC/07 - Stuck to broil on Bake
by plp

Dacor Oven DR30D/NG - Broil Element Needed

Broiler on Decor oven (DR30D/NG) has gone bad. Broiler part 700713 has been replaced by Samsung part DE81-07354A. Problem is that the part has been on "backorder" for 10 months. Concern that it will not be made again. Suggestions? Is there another broiler that will work for this model?

via Dacor Oven DR30D/NG - Broil Element Needed
by markfo

GE Profile JT952SK4SS convection wall oven will not heat past 100 degrees. Regular Bake/Broil works fine. Have replaced in the past element, sensor.

Have also turned the breaker off for a minute. Do I need to replace the element again? Is the control panel since the bake/broil work just fine. Thank you in advance.

via GE Profile JT952SK4SS convection wall oven will not heat past 100 degrees. Regular Bake/Broil works fine. Have replaced in the past element, sensor.
by mariedelvalle

Dacor Range ER36D - Igniters not working (all of them)

Hi There

I was gifted a Dacor ER36D range and it has been fantastic to date.

That said, last night all six ignitors stopped working. This seems a bit strange and I am curious if anybody has experience addressing this issue. My limited research shows that there are 6 ignition modules supporting the burners, but it would be highly unlikely that all six would fault at the same time.

Could there be an inline fuse or something that needs replacing?

via Dacor Range ER36D - Igniters not working (all of them)
by Dan.w716

Kitchenaide kgsa906 not staying lit

So I have been having issues with my range
Now and then it will light and run fine and then other times it will click 3 times light and then go out
I cleaned the burner tube , replaced the igniter
Checked ohms on gas valve , both 195 ohms
Checked volt on dsi was 120
And vdc was 10.5
I am racking my brain to figure this out any help will be great
Thank you

via Kitchenaide kgsa906 not staying lit
by jchaplin

Montgomery Ward Range KSD2405 oven won't light

I can't find anything online about the range (slide-in, propane, about 30" wide) at my mom's house.

The pilot is lit, but when you turn the oven on, the pilot gets bigger but the main oven valve doesn't open.

The pilot thermocouple attaches at a valve below the oven burner and there's no "red button" anywhere.

Is this a bad thermocouple situation? Thanks!

via Montgomery Ward Range KSD2405 oven won't light
by ningersoll

Montgomery Ward KSD2405 oven won't light

I can't find anything online about the range (slide-in, propane, about 30" wide) at my mom's house.

The pilot is lit, but when you turn the oven on, the pilot gets bigger but the main oven valve doesn't open.

The pilot thermocouple attaches at a valve below the oven burner and there's no "red button" anywhere.

Is this a bad thermocouple situation?

Thanks!

via Montgomery Ward KSD2405 oven won't light
by ningersoll

LG relay control panel

I have replaced the relay control panel. My question is, do the black wire and the gray wire go together like I have it or do they need separated? When I took it off the little black box was burnt and I only remember one connector.

via LG relay control panel
by Brewru

Thermador Range PC486GEBS/01 - Need help with changing potentiometer

I need to change the potentiometers on my Thermador PC486GEBS/01 cooking range.
After removing the turn knobs and their trim there are no other screws left but the face plate
still feels connected to the range and not budging. Called Thermador and they said they don't provide any help
with self repair nor do they have any manual/video.

Can someone please help me figure out how I can remove the face plate of this model to replace the potentiometer??
The videos on YouTube showed how to remove...

Read more

via Thermador Range PC486GEBS/01 - Need help with changing potentiometer
by samPull

Thermador pc486gebs/01 - Need help with changing potentiometer

I need to change the potentiometers on my Thermador pc486gebs/01 cooking range.
After removing the turn knobs and their trim there are no other screwsleft but the face plate
still feels connected to the range and not budging. Called Thermador and they said they don't provide any help
with self repair nor do they have any manual/video.

Can someone please help me figure out how I can remove the face plate of this model to replace the potentiometer??
The videos on YouTube showed how to...

Read more

via Thermador pc486gebs/01 - Need help with changing potentiometer
by samPull

Bosch DKE9405MUC Wall Mount Chimney Hood suction not working

Hello everyone. I am having problems with my range hood. The suction no longer works. The filters are clean. I hear noise when its turned on and gets louder when I set it to high but there are no suction at all.

via Bosch DKE9405MUC Wall Mount Chimney Hood suction not working
by AkumaW

Viking Range VGIC305-4BS - why is my old Viking range beeping? even when unplugged

I was trying to trouble shoot the wiring and power supply on my ancient Viking gas range VGIC305-4BS.
even with the power disconnected, the unit is beeping periodically.
why is that?

via Viking Range VGIC305-4BS - why is my old Viking range beeping? even when unplugged
by pjstock

why is my old Viking range beeping? even when unplugged

I was trying to trouble shoot the wiring and power supply on my ancient Viking gas range VGIC305-4BS.
even with the power disconnected, the unit is beeping periodically.
why is that?

via why is my old Viking range beeping? even when unplugged
by pjstock

Indesit double oven IDD6340IX - circuit diagram

Hi,

Just wondering if somebody could help me out please.
Would appreciate if anybody had a circuit diagram of the Indesit double oven IDD6340IX or any other similar oven.
I know how all the parts work individually but just wondered how the connected to each other (especially the rotary switches).

Regards,
Harry

via Indesit double oven IDD6340IX - circuit diagram
by Harry261

Broan Range Hood Evolution 3 QP3 Series - Fan does not want to turn off

So how about Range Hoods? I have a Broan Evolution 3 series range hood my wife is convinced that it is possessed. However, I don't find an area for range hoods or range hood problems--not under stoves/ranges, or HVAC.

If a mod could point me to the right sub-forum, I'll describe the issues and ask for help on this.

QP330SS is full model number, just found it.......

via Broan Range Hood Evolution 3 QP3 Series - Fan does not want to turn off
by Opihi59

Kenmore Elite Dual Fuel Oven won't heat

Hello,

I have a Kenmore Elite Dual Fuel Oven Model #790.78502012. I went to use it today, (worked fine a couple days ago) and it's taken 1 1/2 hours to heat to 256°, and it's struggling to get past that. Any ideas? Thank you.

Lisa

via Kenmore Elite Dual Fuel Oven won't heat
by LISAinTN

how universal are oven heating elements?

wouldn't ya know it - I got all organized for a Pizza Night (from scratch - we are not just reheating frozen pizzas here) last night, I set the oven ot max temp of 550deg and..... it stalls out at 315.... no heat from the lower element. (backup countertop convection oven saved the day)
this was a surprise as just two days ago it had heated up great for bread baking.

This morning, expecting the worst (i.e. circuit board failure which would basically mean tossing out the entire oven since the...

Read more

via how universal are oven heating elements?
by pjstock

Gaggenau EB 290 / 291 wall oven F 14 error

I have two Gaggenau EB 290 / 291 wall ovens and one of them beeps randomly and displays a "F 14" error code. I believe I need to replace the power module part #00268401, but it is no longer available from the manufacturer, appliance parts websites or ebay. I have even checked with circuit board repair companies, but cannot find anyone to repair it.

Does anyone know if this is the correct part to fix the F 14 error and if so, how to get ahold of the part or get it remanufactured?

via Gaggenau EB 290 / 291 wall oven F 14 error
by bernito

Viking Range VGSC305 Stove burners clicking issues

Appreciate any help here! I have a VGSC305-4BDS6, which is probably at least 10 yrs old. Initially, the Stove burners would not click, but would light fine using matches, so I replaced the spark module. Old spark module was Harper-Wyman model 6540 and I replaced with a new PA020041 spark module.
After replacing the spark module, all the burners wouldn’t stop clicking. So, then I replaced all the old igniters with new PA020028 igniters. Where I’m stuck now is that the The Left Rear burner...

Read more

via Viking Range VGSC305 Stove burners clicking issues
by Vikinghelppleas

TTM11027BRSW Summit Range sealed stove burner only works with a match

Hi Jake,

Here's the model:
summitappliance.com/catalog/model/TTM11027BRSW

where online or in NYC can we buy replacement parts like a new ignitor?
Thanks
Fred

via TTM11027BRSW Summit Range sealed stove burner only works with a match
by fred9

Summit brand sealed stove burner only works with a match

Hi Jake,

Here's the model:

TTM11027BRSW

20' wide slide-in gas range with stainless steel doors and sealed burners; replaces TNM11027BFRWY

www.summitappliance.com

where online or in NYC can we buy replacement parts like a new ignitor?
Thanks
Fred

via Summit brand sealed stove burner only works with a match
by fred9

CIT365DS Thermador Induction Cooktop - cracked induction cooktop (glass) and need to replace

Hello,

I cracked my induction cooktop (glass) and need to replace. I cannot find just the cooktop for a Thermador CIT365DS. Does anyone have experience using a different model glass replacement from Thermador for something like this or does anyone know where I might find the replacement part?

via CIT365DS Thermador Induction Cooktop - cracked induction cooktop (glass) and need to replace
by millerjtx

Thermador Induction Cooktop

Hello,

I cracked my induction cooktop (glass) and need to replace. I cannot find just the cooktop for a Thermador CIT365DS. Does anyone have experience using a different model glass replacement from Thermador for something like this or does anyone know where I might find the replacement part?

via Thermador Induction Cooktop
by millerjtx

1940s/50s Monarch electric range

I have a Monarch twin oven electric range from the 40s/50s. There is no make/model, information that is usually found somewhere on such appliances. The model number I've provided is an educated guess based on my best internet sleuthing. The electrician needs to find the maximum amps in order to replace the plug and check the wiring. I'd be grateful if anyone can help me find the maximum amps for this range. I've attached a couple of photos. The second is a plate attached to the...

Read more

via 1940s/50s Monarch electric range
by bkuhlman

RDSCD230-5B Viking D3 Range - Out of commission - fix or move on??

Six years ago we bought a 30" Viking D3 range. It was a display model - gas/dual fuel. Upon delivery we did have a couple small items go bad (controller for oven, convection fan) but all in all not a bad range. Around March this year I smelled a smoking/electrical burning odor coming from the first floor. When I arrived I found the broiler was on an intermittently I heard an electrical sound and some sparking. The controls were all off. Then a heavy arcing sound started from the stove...

Read more

via RDSCD230-5B Viking D3 Range - Out of commission - fix or move on??
by mgambuzza

Viking D3 Range - Out of commission - fix or move on??

Six years ago we bought a 30" Viking D3 range. It was a display model - gas/dual fuel. Upon delivery we did have a couple small items go bad (controller for oven, convection fan) but all in all not a bad range. Around March this year I smelled a smoking/electrical burning odor coming from the first floor. When I arrived I found the broiler was on an intermittently I heard an electrical sound and some sparking. The controls were all off. Then a heavy arcing sound started from the stove...

Read more

via Viking D3 Range - Out of commission - fix or move on??
by mgambuzza

SAMSUNG NE59J7850WS/AA ELECTRIC DUO RANGE TIMER STOPS COUNTING DOWN

SAMSUNG NE59J7850WS/AA ELECTRIC DUO RANGE TIMER STOPS COUNTING DOWN.
I SET THE TIMER AND IT BEGINS TO COUNT DOWN, BUT AFTER A FEW SECONDS, IT
STOPS COUNTING DOWN. CLOCK KEEPS ACCURATE TIME,

SUSPECT ITS EITHER THE DISPLAY PANEL OR MAIN CONTROL BOARD.

ANYONE ELSE ABLE TO FIX THIS?

THANK YOU,
GEORGE

via SAMSUNG NE59J7850WS/AA ELECTRIC DUO RANGE TIMER STOPS COUNTING DOWN
by VORTMAX99

VGIC305-4BS Viking Range - Oven gas igniter fails 2 years after replacement

two years ago you all helped me diagnose my faulty gas igniters on this oven.

FIXED - VGIC305-4BS Viking gas oven burners sputter or are very low

I'm not sure if you guys analyze gas appliances but here goes.my old Viking oven was one day very slow to preheat. it seemed that one of the burner tubes was throwing full flame but the other would sputtter (especially when I opened the door) and die to nothing. removing the burner tube on the...

www.applianceblog.com

here we are two years later and one of them has failed.

there is power in the leads. But a Continuity test on the one that is not heating up shows NO continuity (the other one shows continuity).
I presume that indicates a failed igniter?

though beyond that basic question, I...

Read more

via VGIC305-4BS Viking Range - Oven gas igniter fails 2 years after replacement
by pjstock

Viking gas igniter fails 2 years after replacement

two years ago you all helped me diganose my faulty gas igniters on this oven.
here we are two years later and one of them has failed.

there is power in the leads. But a Continuity test on the one that is not heating up shows NO continuity (the other one shows continuity).
I presume that indicates a failed igniter?

though beyond that basic question, I guess my other question is, is it reasonable that an new ignitor should fail after just 2 years (of not very heavy use")?

Peter

via Viking gas igniter fails 2 years after replacement
by pjstock

Viking Range VGSC305 clicking issues

Appreciate any help here! I have a VGSC305-4BDS6, which is probably at least 10 yrs old. Initially, the Stove burners would not click, but would light fine using matches, so I replaced the spark module. Old spark module was Harper-Wyman model 6540 and I replaced with a new PA020041 spark module.
After replacing the spark module, all the burners wouldn’t stop clicking. So, then I replaced all the old igniters with new PA020028 igniters. Where I’m stuck now is that the The Left Rear...

Read more

via Viking Range VGSC305 clicking issues
by Vikinghelppleas

Viking VGSC305 clicking issues

Appreciate any help here! I have a VGSC305-4BDS6, which is probably at least 10 yrs old. Initially, the Stove burners would not click, but would light fine using matches, so I replaced the spark module. Old spark module was Harper-Wyman model 6540 and I replaced with a new PA020041 spark module.
After replacing the spark module, all the burners wouldn’t stop clicking. So, then I replaced all the old igniters with new PA020028 igniters. Where I’m stuck now is that the The Left Rear...

Read more

via Viking VGSC305 clicking issues
by Vikinghelppleas

HBL8450UC/10 Bosch use double wall oven control board in single wall oven

I have an HBL8450UC/10 single Bosch wall oven and the main control board is pretty old with two failed relays. I got a control board from eBay, which is for a double oven of the same generation. I'd like to use it, because it is much newer. The PCB is the same but of course double the number of relays are populated. Unfortunately the board does not work in the single oven. The fan runs all the time. Is there some simple trick to convert it into a single board? How does the microcontroller...

Read more

via HBL8450UC/10 Bosch use double wall oven control board in single wall oven
by guho

Bosch use double wall oven control board in single wall oven

I have an HBL8450UC/10 single Bosch wall oven and the main control board is pretty old with two failed relays. I got a control board from eBay, which is for a double oven of the same generation. I'd like to use it, because it is much newer. The PCB is the same but of course double the number of relays are populated. Unfortunately the board does not work in the single oven. The fan runs all the time. Is there some simple trick to convert it into a single board? How does the microcontroller...

Read more

via Bosch use double wall oven control board in single wall oven
by guho

BGRP34520SS Blomberg gas oven bake/boil not working

Hello i have a blomberg gas oven model BGRP34520SS which is only 3 years old. This has no digital display or keypads even. The bake and the broil igniters don't ignite and it never heats up. There is one on the top and bottom of the oven. I do hear some clicking once in a while after about 10 seconds but nothing heats. I did isolate the broil(igniter up top) and measured the resistance to be 162 ohms. is this too high of a value? On the blogs i have read it's okay between 80 and 180...

Read more

via BGRP34520SS Blomberg gas oven bake/boil not working
by avtar1

blomberg gas oven bake/boil not working

Hello i have a blomberg gas oven model#bgrp34520ss which is only 3 years old. This has no digital display or keypads even. The bake and the broil igniters don't ignite and it never heats up. There is one on the top and bottom of the oven. I do hear some clicking once in a while after about 10 seconds but nothing heats. I did isolate the broil(igniter up top) and measured the resistance to be 162 ohms. is this too high of a value? On the blogs i have read it's okay between 80 and 180...

Read more

via blomberg gas oven bake/boil not working
by avtar1

Bosch Range HDIP054U/C Why is the Oven Locking Panel So Much

What am I doing wrong?

We just moved into a new house and have this Bosch oven for 2 days, and it has locked up and needed to be reset several times. It seems the panel lock button does not work. We have held it for 3 , 4, 5 seconds, a full minute, nothing. The only way to unlock it is to reset the breaker. Ok well I guess I could live with that if it didn't happen so often.

When cooking, I opened the door to check the food. Panel locked. Then later after cooking was done, after pressing...

Read more

via Bosch Range HDIP054U/C Why is the Oven Locking Panel So Much
by BirdBird

Why Bosch Oven Locking Panel So Much

What am I doing wrong?

We just moved into a new house and have this Bosch oven for 2 days, and it has locked up and needed to be reset several times. It seems the panel lock button does not work. We have held it for 3 , 4, 5 seconds, a full minute, nothing. The only way to unlock it is to reset the breaker. Ok well I guess I could live with that if it didn't happen so often.

When cooking, I opened the door to check the food. Panel locked. Then later after cooking was done, after pressing...

Read more

via Why Bosch Oven Locking Panel So Much
by BirdBird

HGS256UC/02 Bosch gas range rear panel removal

Hi I tried to remove the larger rear panel to replace my relay board,I took off the 4 visible screws but it will not lift off are there screws underneath?

via HGS256UC/02 Bosch gas range rear panel removal
by BOB F

Bosch gas range rear panel removal

Hi I tried to remove the larger rear panel to replace my relay board,I took off the 4 visible screws but it will not lift off are there screws underneath?

via Bosch gas range rear panel removal
by BOB F

Thermador Oven SMW272 Won't Heat, Stuck on Preheat 100

Hello, I have a Thermador wall oven, I've followed a previous post on what appeared to be the same condition. The post is from a few years ago and is closed now. I've tried to follow the same steps to fix but no luck. Here is the condition and what I've tried.
I can turn on bake, the cooling fan comes on, preheat 100 comes on, I hear relays clicking, no heat. I turn on broil with the same results. I try convection bake, the cooling fan turns on and the convection fan turns on, the...

Read more

via Thermador Oven SMW272 Won't Heat, Stuck on Preheat 100
by jaks2144

Old Hardwick oven starting issues

Hello - My mother has an old 1960's(?) gas oven which has always worked great. Over the past few weeks, the ignitor is not working well. I've been told if we call a technician they will "tag" the unit, turn off the gas and we'll have to buy a new oven. That said, I'm a bit hesitant to call someone.

I don't mind buying a new oven if needed, but I also don't want to toss this thing if all it needs is a good cleaning, a new ignitor, etc.

Does anyone have a recommendation for what I might be...

Read more

via Old Hardwick oven starting issues
by lineu99

Bosch Oven Timer Locked

We have a newer Bosch Double oven with the Right-hand Swing Doors. My wife does a lot of baking and loves that she doesnt have to reach over the hot doors to get things in and out of tbe oven. Only major flaw with this oven is there is something wrong with the built in Kitchen Timer feature. It has gotten itself locked on 4 minutes and is frozen. Can't clear it without turning the main power off from the circuit breaker (shouldnt have to do that with a new appliance!). Bosch cant figure...

Read more

via Bosch Oven Timer Locked
by R.Woods

KM443 Miele cooktop only works when glass cover is removed

Our Miele cooktop is not turning on. We've tried turning off the breaker, but that didn't work. We took off the glass cover to check the connections. When the cover was off, it worked. When we put the cover back on, it stopped working. Any ideas?

via KM443 Miele cooktop only works when glass cover is removed
by Myrna O

Wolf Rangetop RT484CG

How do you access the left spark module?

via Wolf Rangetop RT484CG
by Voltress

Miele cooktop only works when glass cover is removed

Our Miele cooktop is not turning on. We've tried turning off the breaker, but that didn't work. We took off the glass cover to check the connections. When the cover was off, it worked. When we put the cover back on, it stopped working. Any ideas?

via Miele cooktop only works when glass cover is removed
by Myrna O

Wolf RT484CG

How do you access the left spark module?

via Wolf RT484CG
by Voltress

Viking VGIC neither ovens, broiler, or griddle ignite

Hi I have an older Viking 48” VGIC model running propane. Right now all six burners work, but neither ovens, the broiler, or the griddle will ignite. The stove is new to me and when I first got it I could usually get something to ignite, but once it reached temp it would not re-ignite.

I’ve done a bunch of troubleshooting and have some interesting phenomena to report. It seems like if I unplug the stove and close the propane tank and flush the line, and then plug the stove back in, I can...

Read more

via Viking VGIC neither ovens, broiler, or griddle ignite
by Shanninc

VES0107CSS Viking oven wont heat

Hello I am a Noob to the forum.. I have a viking oven that won't heat. It is getting power and the baking element tests out at 23 ohms and has continuity (obviously) inam getting 120ish each leg. Clock lights and fans work just no heat Ves0107css

via VES0107CSS Viking oven wont heat
by Trojanman

Viking oven wont heat

Hello I am a Noob to the forum.. I have a viking oven that won't heat. It is getting power and the baking element tests out at 23 ohms and has continuity (obviously) inam getting 120ish each leg. Clock lights and fans work just no heat Ves0107css

via Viking oven wont heat
by Trojanman

RDSCG2305BSS Viking D3 Gas Range - Broiler will not light

Everything else works on this unit. I turn on Broil and turn temp knob to broil. Oven light comes on and in a few seconds I hear the igniter clicking. It does that for a few seconds and then stops. I don't think I hear gas flow like in other modes. Any thoughts on how to troubleshoot and fix?

via RDSCG2305BSS Viking D3 Gas Range - Broiler will not light
by dpfaehler

RDSCG2305BSS Viking D3 Gas Broiler will not light

Everything else works on this unit. I turn on Broil and turn temp knob to broil. Oven light comes on and in a few seconds I hear the igniter clicking. It does that for a few seconds and then stops. I don't think I hear gas flow like in other modes. Any thoughts on how to troubleshoot and fix?

via RDSCG2305BSS Viking D3 Gas Broiler will not light
by dpfaehler

Viking D3 Gas Broiler will not light

Everything else works on this unit. I turn on Broil and turn temp knob to broil. Oven light comes on and in a few seconds I hear the igniter clicking. It does that for a few seconds and then stops. I don't think I hear gas flow like in other modes. Any thoughts on how to troubleshoot and fix?

via Viking D3 Gas Broiler will not light
by dpfaehler

Whirlpool oven wont heat

Hello,

I have a whirlpool range that is just about 5 years old. Recently while baking something, I heard a loud noise like something spinning too fast and the offen got really smokey. The next day I went to bake and the oven would not heat. I pulled the range out and discovered quickly that the bake element had burnt out. Ordered a replacement one and installed it, and it still would not heat. The bake and broil settings would not work, even though both elements tested out fine. I checked...

Read more

via Whirlpool oven wont heat
by Jcjordan2

Whirpool - WEE730H0DS0 - wont heat!

Hello,

I have a whirlpool range that is just about 5 years old. Recently while baking something, I heard a loud noise like something spinning too fast and the offen got really smokey. The next day I went to bake and the oven would not heat. I pulled the range out and discovered quickly that the bake element had burnt out. Ordered a replacement one and installed it, and it still would not heat. The bake and broil settings would not work, even though both elements tested out fine. I checked...

Read more

via Whirpool - WEE730H0DS0 - wont heat!
by Jcjordan2

Touch pad oven button on whirlpool stove

On touch pad oven doesn’t work, light, or timer. Broil works. Burners working. Is there just a bake switch I could replace instead of replacing the touchpad?

via Touch pad oven button on whirlpool stove
by hlawson

Broken Display Console on Thermador Oven SMW272YP

Ok. So i made a big mistake. I managed to shatter my operating module for my thermador oven. I have been looking online for the right part to replace it - and now im thoroughly confused. Hoping you all can help!

The model number for my unit (I found this on the oven section) is SMW272YP. It is a stainless steel 3 component device (Microwave, Warming Drawer, Oven).

There are a couple other numbers that may be helpful. The circuit board (which is attached to the back of the display...

Read more

via Broken Display Console on Thermador Oven SMW272YP
by pagnotar

Broken Display Console on Thermador Oven

Ok. So i made a big mistake. I managed to shatter my operating module for my thermador oven. I have been looking online for the right part to replace it - and now im thoroughly confused. Hoping you all can help!

The model number for my unit (I found this on the oven section) is SMW272YP. It is a stainless steel 3 component device (Microwave, Warming Drawer, Oven).

There are a couple other numbers that may be helpful. The circuit board (which is attached to the back of the display...

Read more

via Broken Display Console on Thermador Oven
by pagnotar

JennAir electric stove dual element issue

Hello all,
I have 2 Jenn-Air electric stoves model JES8850BCS.
On both of my stoves the front left dual burner doesn't work, the element tested good.
I installed a brand new infinite switch WPW10185286.
Turned the power on and the switch is not working, im getting 120V in and no voltage coming out.
Is it just a bad luck and I bought a broken switch or there might be othere issuies?
Thank you for your help!

via JennAir electric stove dual element issue
by Edi

VGIC365-4QBKM Viking Oven - two burners - both start fine - one shuts off

I have An issue with my Viking oven. It was installed almost 20 years ago. Due to the stay at home protocols we have been cooking more. We noticed that the time it takes to warm up the oven is very long, 20 minutes plus. I took the oven apart and noticed that both burners had large holes close to the igniters. Also, one of the igniters did not turn on. After replacing both burners and the one ignite, things did not change much. I found that I could view the burners by opening the...

Read more

via VGIC365-4QBKM Viking Oven - two burners - both start fine - one shuts off
by Kbhkgeorge

Viking Oven - two burners - both start fine - one shuts off

I have An issue with my Viking oven. It was installed almost 20 years ago. Due to the stay at home protocols we have been cooking more. We noticed that the time it takes to warm up the oven is very long, 20 minutes plus. I took the oven apart and noticed that both burners had large holes close to the igniters. Also, one of the igniters did not turn on. After replacing both burners and the one ignite, things did not change much. I found that I could view the burners by opening the...

Read more

via Viking Oven - two burners - both start fine - one shuts off
by Kbhkgeorge

Trying to track down an early 90's Cooktop / Rangetop

My parents had this great cook top when they renovated our house in the early 90's. It had 4 burners, a down draft vent. It may or may not have had a griddle in the center. The stand out feature was being able to pop out a 2 burner pan and insert a grill with a straight tube burner. The grill top had black square grills running horizontal across the unit. Its very similar to the Jenn Air cooktops but no one in my family thinks it was a Jenn Air. Any ideas?

via Trying to track down an early 90's Cooktop / Rangetop
by MontanaWoodCo

Single Thermador oven thinks it's a double

Hello! I have a single ~13 year old electric Thermador oven (model number plate is too dirty to read). When I try to turn on convection bake it gives the following error "Not available in lower oven". I had a technician come out several months ago to fix the same issue and he resolved it by pressing a series of buttons on the panel (no disassembly, no breaker reset), presumably to reset the oven and "remind" it that it's not part of a double system. He got the "code" from calling a Thermador...

Read more

via Single Thermador oven thinks it's a double
by karttyler

Need information on Lindemann & Hoverson countertop stove

A friend asked me to look at the L&H (Lindemann & Hoverson, ca. 1957 or most likely earlier, perhaps WWII vintage) countertop stove unit that she has.

It is built into the countertop and has a wide, flat single coil (with the entire nichrome element in one flat wide tube).

The heating elements were originally sourced from Frigidaire. The voltage is 240 VAC. A replacement element is available under the Chromalox name. However, Chromalox (which is now a part of a British company) sold off...

Read more

via Need information on Lindemann & Hoverson countertop stove
by wnlewis

HDI7282U/05 Bosch Dual Fuel Range broiler in oven not working

My Bosch Dual Fuel Range is about 10 years old. In the past year I noticed problems with preheating the oven and maintaining the temperature until I discovered that the hinges on the oven door were apparently sprung. An expensive service visit and expensive parts...$350 later I was back in business. That was about a month ago. Today I tried to use the broiler for the first time since that repair. It will not heat. The display indicates that the broiler is on. The blower comes...

Read more

via HDI7282U/05 Bosch Dual Fuel Range broiler in oven not working
by Graves

Bosch Dual Fuel Range broiler in oven not working

My Bosch Dual Fuel Range is about 10 years old. In the past year I noticed problems with preheating the oven and maintaining the temperature until I discovered that the hinges on the oven door were apparently sprung. An expensive service visit and expensive parts...$350 later I was back in business. That was about a month ago. Today I tried to use the broiler for the first time since that repair. It will not heat. The display indicates that the broiler is on. The blower comes...

Read more

via Bosch Dual Fuel Range broiler in oven not working
by Graves

2003 GE JGB900se stove won’t lite

Oven will not lite on its own. If I flip the pop pit on the gas valve it ignites. When bake temp is reached the burner turns off and then will not reignite again.

recently converted to LP and this issue started.

via 2003 GE JGB900se stove won’t lite
by Stumped 19

ILVE range wont light

After hooking my range up to a propane cylinder i got a small puff of propane coming out the burners but nothing more. I would light for like 2 sesonds and then go out. I took the regulator off the back and when I turn the propane cylinder on I can hear gas coming through the stove side of the regulator. I've spoke to the manufacturer and the only regulator required is the one on the back of the stove so there is a line running directly from the regulator on the stove to a 100 gallon...

Read more

via ILVE range wont light
by davidrcase

LLVE range wont light

After hooking my range up to a propane cylinder i got a small puff of propane coming out the burners but nothing more. I would light for like 2 sesonds and then go out. I took the regulator off the back and when I turn the propane cylinder on I can hear gas coming through the stove side of the regulator. I've spoke to the manufacturer and the only regulator required is the one on the back of the stove so there is a line running directly from the regulator on the stove to a 100 gallon...

Read more

via LLVE range wont light
by davidrcase

SOLUTION : For issue with Bosch HIIP054C - Induction Range Oven PROBE Issues!!!

To solve the issue :

1. Turn Off the breaker of your Oven
2. Wait 30 minutes
3. Test with : Bake 250
4. Activate on the console the Probe
5. It ask to insert the Probe... SLOWLY insert it until it Recognize it... Do nor insert it fully at first!
6. when the Probe is Detected...
7. Try to insert it fully

It works for me ... may be you can give it a try, know knows, may it could solve your issue!

via SOLUTION : For issue with Bosch HIIP054C - Induction Range Oven PROBE Issues!!!
by regismaltais

1950s Frigidaire Oven door handle help?

Hi!
So we have a lovely 1950s Frigidaire RS50 Stove but yesterday the oven door handle got so loose it fell off. Most unfortunately, you can't access the screw heads from the back of the door. We assume you have to take the door apart in order to access the screw heads, and it being from the 1950s, we assume it also has asbestos and therefore don't want to take it apart for obvious reasons.
the screws are rather short and the handle has a secondary decorative piece that you have to hold...

Read more

via 1950s Frigidaire Oven door handle help?
by Jazzylittledame

ERDS36 Dacor Range Oven Short

I have a Dacor ERDS 36 range and I started the oven and heard a puff.
The clock went out with the display.
This happened before and it was a fried baking element.
Assuming this was the problem, I ordered a new one and went to install and found out the one of the spade connectors had burned off.
The wires are very short and I can't located the burned off wire.
How do you gain access to this.
From the front or the back?

via ERDS36 Dacor Range Oven Short
by webco747

Dacor Range Oven Short

I have a Dacor ERDS 36 range and I started the oven and heard a puff.
The clock went out with the display.
This happened before and it was a fried baking element.
Assuming this was the problem, I ordered a new one and went to install and found out the one of the spade connectors had burned off.
The wires are very short and I can't located the burned off wire.
How do you gain access to this.
From the front or the back?

via Dacor Range Oven Short
by webco747

O'Keefe & Merritt. broiler won't stay lit

Our ancient all-gas early 1950s OKM's broiler won't stay on unless the gas safety button is held in.

The pilot is on, strongly, and the thermocouple is nicely bathed in its flame. If I hold in the safety button for the broiler, it lights right away, but it doesn't stay lit.

I figure it could be the thermocouple at fault, or the safety valve -- anyone know how I can test these?

Thanks!

via O'Keefe & Merritt. broiler won't stay lit
by ningersoll

Oven doesn’t heat to displayed temperature

If I select bake to 400 the thermometer I put inside the oven reads 350....I set it 500 and it’ll read 450

it’s less then 3 years old, does anyone know how to solve this issue?

via Oven doesn’t heat to displayed temperature
by Flipfuzion

VGIC3054BSS Viking Oven will not light

I have a new to me Viking VGIC3054BSS Range and the oven will not light. I replaced the top oven switch / thermostat, the light comes on and there is a click but no ignitors inside working. The top burners are fine......HELP PLEASE!!!!! Mr. Viking Tech.....

via VGIC3054BSS Viking Oven will not light
by studioandolina

Viking Oven will not light

I have a new to me Viking VGIC3054BSS Range and the oven will not light. I replaced the top oven switch / thermostat, the light comes on and there is a click but no ignitors inside working. The top burners are fine......HELP PLEASE!!!!! Mr. Viking Tech.....

via Viking Oven will not light
by studioandolina

non-Zephyr motor to fit Zephyr Venezia ZVE-E30 hood?

My hood blower fan motor is in its last days and I could use some help or advice. Zephyr tells me that my hood, which is labeled "ZVE-E30," actually is a "ZVE-E30S" and its motor no longer is manufactured. Also, they tell me, no other Zephyr motor will work, so I will need to replace the entire hood. This seems a little hard to believe--the hole to the duct is six inches in diameter and the plastic fan/motor housing is roughly nine inches in diameter, which doesn't seem uncommon--but for all...

Read more

via non-Zephyr motor to fit Zephyr Venezia ZVE-E30 hood?
by P-Dub

Bosch Range HDI7152U-01, red light on display

Hello,

I have a BOSCH HDI7152U-01 slide-in duel fuel range. There is a steady red light on the lower left hand corner of the display (see image below). The display panel does not work and the oven will not come on.

I have tried:

1. a full unplug reset for 10 minutes
2. changing the power module (PN...

Read more

via Bosch Range HDI7152U-01, red light on display
by AndrewK2

BOSCH HDI7152U-01, red light on display

Hello,

I have a BOSCH HDI7152U-01 slide-in duel fuel range. There is a steady red light on the lower left hand corner of the display (see image below). The display panel does not work and the oven will not come on.

I have tried:

1. a full unplug reset for 10 minutes
2. changing the power module (PN 00657860) (shown below)

The red light is still on and the display still...

Read more

via BOSCH HDI7152U-01, red light on display
by AndrewK2

Can anyone help with the diagram for Imperial oven model IR-G72-CC?

Hi could you help me with the diagram for an Imperial Commercial Convection oven model IR-G72-CC, serial 11124819, natural gas? I found a supplier for the parts but even they couldn't send me a diagram for some reasons... thank you!

via Can anyone help with the diagram for Imperial oven model IR-G72-CC?
by Bearrepair

F8e0 cooling fan speed low

I am getting the f8e0 error code on my oven. Cooling fan speed low. Quick Google search showed that it could be the fan motor, hall sensor, or board.
Came across a couple of posts here that showed how to check those parts on a different oven. (Fan motor, hall sensor, and board) Is there, by chance, a way anyone can post those same steps?

Thanks

Jon

via F8e0 cooling fan speed low
by Mcnabb75

Replacement Tension Clip for Dacor ERV3615 Downdraft Hood

This is a now discontinued hood so parts are either impossible to get or very very expensive. The downdraft hood uses removable metal grill filters that are held in place with tension clips. One of the filters has lost its clip. Rather than buying a whole new filter for $131 not including shipping, I'm hoping to find or fabricate a replacement tension clip.

The filter itself is 14" wide x 5 7/8" tall. The clip is 2 9/16" long and the part of the tang that inserts into the filter is 1/8"...

Read more

via Replacement Tension Clip for Dacor ERV3615 Downdraft Hood
by Lexx

Thermador SCD302TP - F2, F5 error after Self Clean in top ov

Hi guys,

Thermador SCD302TP

So I finally got my oven working after replacing the relays on the relay board so I ran a self clean on both the top and bottom oven. Bottom oven still works fine after the self clean, but the Top oven is now throwing 2 different codes - sometimes it's F2, sometimes it's F5 and I also got an F3 today as well!

I checked the thermal fuse and it's not engaged. I also tried a "hard reset", but flipping the breaker and leaving it off for 30 minutes. Still got the...

Read more

via Thermador SCD302TP - F2, F5 error after Self Clean in top ov
by slimcharger

Jenn Air electric downdraft range, the convection temperature wont rise above 199F, how do i fix it

Convection oven won't heat up past 199F?

via Jenn Air electric downdraft range, the convection temperature wont rise above 199F, how do i fix it
by Marlo

HBL8450 Bosch Oven Heating Woes -- Normal?

We are pretty frustrated because we bought a new HBL8450 oven and a new microwave (several thousand dollars worth) only 18 months ago and we’ve had numerous issues. We could really use some advice right now to determine if this behavior below is normal. Perhaps if someone can explain what’s expected...or needed for repair.

We’ve confirmed the following with TWO brands of oven thermometers, but we started down this path many months ago when we noticed our cakes weren’t baking correctly and...

Read more

via HBL8450 Bosch Oven Heating Woes -- Normal?
by bovino

Bosch Oven Heating Woes -- Normal?

We are pretty frustrated because we bought a new HBL8450 oven and a new microwave (several thousand dollars worth) only 18 months ago and we’ve had numerous issues. We could really use some advice right now to determine if this behavior below is normal. Perhaps if someone can explain what’s expected...or needed for repair.

We’ve confirmed the following with TWO brands of oven thermometers, but we started down this path many months ago when we noticed our cakes weren’t baking correctly and...

Read more

via Bosch Oven Heating Woes -- Normal?
by bovino

Viking Oven Igniter Failing after recent replacement.

Hello! Thank you for reading my post.

I have a VIKING VGIC365-4Qss range/oven, serial number R06150113261. It was made in June, 2001. One of the two oven burners is not igniting.

I suspect there is a problem with the igniter or the gas tube or both.

FULL INFORMATION:
In 2018, the oven started taking a long time to heat up. A Viking tech person came and explained that the RIGHT burner...

Read more

via Viking Oven Igniter Failing after recent replacement.
by kbleau

Short circuit in Hardwick Range H31103SAW

I have a Hardwick gas range whos 120 volt circuit was struck by lightning during a thunderstorm. The circuit operates the stove eye, oven and broiler igniters. It is now shorted. I first learned this when the GFCI receptacle it is on had tripped. I can unplug the oven from the receptacle and am able to reset the receptacle. Can someone help me troubleshoot what components on this oven circuit that could be shorted so I can use my stove burner, oven and broiler igniters again? Thank you...

Read more

via Short circuit in Hardwick Range H31103SAW
by kentc80

VIKING VGIC365-4Qss Burner Ignition Issues

Hello! I would be grateful for any assistance.

I have a VIKING VGIC365-4Qss, serial number R06150113261. It was made in June, 2001. Most of the parts are original.

I'm having a problem with the RANGE (oven is fine). Over the last few months, the burners have gradually not been lighting well. Only 2 burners out of 5 are sparking regularly. I replaced both spark modules, the one that lights the left 2 burners, and the one that lights the right two burners and the grill.

At first, I...

Read more

via VIKING VGIC365-4Qss Burner Ignition Issues
by kbleau

Short circuit in Hardwick gas oven

I have a Hardwick gas oven whos 120 volt circuit was struck by lightning during a thunderstorm. The circuit operates the stove eye, oven and broiler igniters. It is now shorted. I first learned this when the GFCI receptacle it is on had tripped. I can unplug the oven from the receptacle and am able to reset the receptacle. Can someone help me troubleshoot what components on this oven circuit that could be shorted so I can use my stove burner, oven and broiler igniters again? Thank you...

Read more

via Short circuit in Hardwick gas oven
by kentc80

Viking VGS300-4BDWH oven struggles to heat up

Hi there, the place I rent has a Viking VGS300-4BDWH oven/stove in it.

The oven seems to take way too long to heat up, sometimes never even reaching the desired temp. This morning I set it to 400* (hoping to get to 350*), and 50min later it was only up to 325*. This model has a dial/knob adjustment for the temp and no actual temperature readout, but I have my own thermometer inside the oven that I use to verify temps. When cooking a sheet of bacon, I also noticed that half seemed to cook...

Read more

via Viking VGS300-4BDWH oven struggles to heat up
by brianpeck

Thermador SCD302TP Clock touch button doesn't work - any ideas?

Hey guys,

The "clock" button doesn't work on my Thermador SCD302TP touch panel. Every other button does. What could it be? Any ideas for a repair, or just live with it?

via Thermador SCD302TP Clock touch button doesn't work - any ideas?
by slimcharger

IBS330PWM00 Ikea wall oven bake function starts broiler

I have an Ikea wall oven that is activating the broiler when I select bake. I've checked the temperature sensor, normal resistance (1000 ohm). Continuity for both bake and broil elements is ok. Display and function selector (a dial) operate normally and do not show any error code. I suspect the problem is the main oven control board (?relay board WP8304380 $300) but want to be sure it is not the control panel control (WP8303093 $175). Any help will be appreciated.

via IBS330PWM00 Ikea wall oven bake function starts broiler
by paulpaulr

Thermador SC302 - Only broiler works in bottom oven - How to test for relay issues?

Hi guys,

I just moved into a place and it came with a nice Thermador model SC302 Double wall oven. The oven had one issue which I have already repaired, which was a dim display (capacitors were dead)

PART NUMBERS: 2 x 470 uf 35V, and one 68 uf 35v. (in the end I only replaced 1x470uf 35v because the LED board is in the way of the second one... replacing the 2 seems to have brought the display back to life though.)

The previous owner of the home said the oven doesn't work, only the broiler...

Read more

via Thermador SC302 - Only broiler works in bottom oven - How to test for relay issues?
by slimcharger

VDSC530 Viking oven tripping breaker

Our 10 year old Viking oven (VDSC530-4BSS) started tripping the breaker. There is no similar problem with the burner igniters or oven light. Should I replace the heating element and hope for the best, or call a professional? Thanks.

via VDSC530 Viking oven tripping breaker
by Jascott

HG18054UC BOSCH OVEN IGNITER REPLACEMENT: HOW ACCESS WHERE 2 WIRES INSERT?

BOSCH OVEN IGNITER HAS FAILED IT SEEMS. GOT NEW REPLACEMENT. BUT TWO WIRES NEED DISCONNECTED FROM BEHIND REAR INNER VERTICAL WALL OF OVEN. DO I NEED TO GO THROUGH BACK SIDE OF OVEN TO REPLACE IGNITER, INSERT THE WIRES? THESE ARE NOT THE WIRE END TPES THAT ONE CONNECTS THROUGH 'CONE' SCREW TYPE.

via HG18054UC BOSCH OVEN IGNITER REPLACEMENT: HOW ACCESS WHERE 2 WIRES INSERT?
by TIMINVA