Need to find replacement for failed double wall oven

Our wall oven quit after around 20 years. Ready to replace it but can't find anything that would fit well in the space.

The current opening is 27" wide and 47.75" tall. It's a 240V convection Bosch double wall oven from around 1998. I'd even be willing to replace it with a single wall oven - if I could get it to fit in that open. Not really interested in remodeling my entire kitchen to accommodate something wider.

I would consider an old but new exact replacement.

Any thoughts/leads?

Thanks much!

via Need to find replacement for failed double wall oven
by TheinBomb

LG Double Oven LDE3017ST - always on broil

Hi, the top oven in my LG only broils now. Has anyone ever seen this and have any ideas what the problem could be? The bottom oven works fine. Thank you!

via LG Double Oven LDE3017ST - always on broil
by SSL

Jenn Air Dual ELement Electric smoothtop

Right front Dual element is not working. Each element reads correct resistance. There is a probe that interfaces with the control switch (WPW10185286) that measures "open". If I short out leads that go to that probe from the control switch, then the elements will get hot. I am wondering if there is a way to replace just the probe, rather than the complete element (burner assembly W10823724)?

via Jenn Air Dual ELement Electric smoothtop
by Terryhuberts

LDG4313ST Turn off or remove speaker from LG gas oven

Hello. I have an LG gas stove with two oven compartments, 2.5 years old. There seems to be no way to completely turn off the speaker. Every time the oven reaches its set temp it plays a very annoying song that is making my dog stroke out. I found a YouTube video that shows the removal of the speaker from the control board of an electric LG, but nothing on a gas unit. I've removed the control board and can't find anything that looks even remotely like a speaker. Can anyone tell me how to turn it off or how to find it on the board so I can remove it?

via LDG4313ST Turn off or remove speaker from LG gas oven
by billeven

Turn off or remove speaker from LG gas oven

Hello. I have an LG gas stove with two oven compartments, 2.5 years old. There seems to be no way to completely turn off the speaker. Every time the oven reaches its set temp it plays a very annoying song that is making my dog stroke out. I found a YouTube video that shows the removal of the speaker from the control board of an electric LG, but nothing on a gas unit. I've removed the control board and can't find anything that looks even remotely like a speaker. Can anyone tell me how to turn it off or how to find it on the board so I can remove it?

via Turn off or remove speaker from LG gas oven
by billeven

Duro NXR PRO 3051 Range no spark/inconsistent flame

Hey guys, I have a Duro NXR PRO 3051 with no spark at one burner and inconsistent flame on another and I also cannot find the full model and serial number. It is not inside the oven as I am used to seeing and it customer doesnt want it pulled out if possible so I havent checked on the back. The customer purchased it with both of these problems and I have done a little research which shows that others have experienced some of the same things and have had difficulty correcting them with little to no support from the manufacturer and repair companies being unable to find a solution. As far as the spark issue I have verified that there is power to the spark electrode and if I look down inside I can see a glimmer of a spark occuring somewhere near the base of the electrode but can't see where exactly. I have had this issue on other brands a number of times in the past and have always been able to correct it by cleaning up the electrode and burner cap as well as lightly sanding both to reestablish a good ground. This unit is almost new and very clean and although I did try this it had no effect. I cannot see any damage to the electrode and if I hold a screwdriver to it It will spark to that. Not sure what the implications of that are. As far as the inconsistent flame it is only on one burner and I have narrowed it down to an issue with the base as if I swap bases It no longer occurs. Again, the base is very clean and I don't see any blocked ports etc. The gas tube on the bottom of the base is adjustable, I believe for gas to air mixture, but adjusting it does not correct the issue and it does not unscrew all the way so I can attempt to clean it more thoroughly. I am thinking that this base will just have to replaced. More concerned about solving the spark issue at the moment though. I have reached out to the manufacturer but havent heard back yet and have not heard good things about their customer/tech support. Any guidance is greatly appreciated!

Attached Thumbnails

     

via Duro NXR PRO 3051 Range no spark/inconsistent flame
by alwaysaffordableappliance

Fridgidaire FGF337ECD oven/broil functions not working

Hi,
I recently obtained an older Frigidaire gas range (FGF337ECD) that had apparently never been used. Though the stove top works, the oven did not as the control module was not working, so I replaced it. The oven still did not work, so I removed, cleaned and inspected the igniter, safety valve and flame tubes and made sure all wires were connected. The igniter had a slight blue tinge - so it was fired up at least once, but I replaced it anyway and the oven still will not operate. When I set the control panel to bake, after a few seconds I can hear the relay click, but the igniter will not glow. I disconnected the gas line to the safety valve and turned on the gas, which is present.
Is there a way to test the safety valve, or is there something else that could be wrong. I have invested almost $200 in parts now, and would like to get it working, but wonder if it's worth it.
Any help would be appreciated.
Thanks.

via Fridgidaire FGF337ECD oven/broil functions not working
by TGNY

Whirlpool Gas Range (WEG730H0DS0) Cancel Button Not Working (F2E0)

Hi Everyone,

First of all thank you for your time and input to resolve my annoying problem with this range. I recently got an error code F2E0 and noticed that my Cancel button was not working. I did all of the following but the issue is still there. Please help:

1) Reset the power (did not solve)
2) Changed the control panel where the clock is displayed (did not work)
3) Called the technician and he said I need a new control board. I changed it (did not solve)
4) Changed the touch pad where the keys are located. All works but Cancel Button

Pretty much I changed everything that may be causing this issue but the ribbon cable, That will be the next on my list to change but it is very annoying that the Cancel button is the only issue here. Is there anybody out there encountered and solved this issue?

Thanks,

via Whirlpool Gas Range (WEG730H0DS0) Cancel Button Not Working (F2E0)
by helplease

Dacor ERD30S06SCH gas broiler has flames too high

IMG_2759.mov
Don’t know if the video will post or not but I have a Dacor ERD30S06SCH gas broiler has flames coming out passed the broiler edges. Any ideas?

via Dacor ERD30S06SCH gas broiler has flames too high
by Luke Finley

VGIC3074BSS Viking Range - Inconsistent burner lighting

We've had some recent issues with the gas burners lighting consistently. I cleaned the top and made sure there are no obstructions and then I opened the front panel and low and behold I found something that doesn't look too great.

Can anyone give me the part # for that unit? Thanks in advance.

Attached Thumbnails

 

via VGIC3074BSS Viking Range - Inconsistent burner lighting
by jackaninny

Viking Range - Inconsistent burner lighting

We've had some recent issues with the gas burners lighting consistently. I cleaned the top and made sure there are no obstructions and then I opened the front panel and low and behold I found something that doesn't look too great.

Can anyone give me the part # for that unit? Thanks in advance.

Attached Thumbnails

 

via Viking Range - Inconsistent burner lighting
by jackaninny

Samsung FX710BGS/XAA Oven not heating up

I have a Samsung FX710BGS/XAA. The oven stopped heating up when turned on. The igniter glows but it doesn't start. After looking at this forum, I tried turning on a burner while starting the oven and it didn't seem to work the first time (I was expecting to hear a wosh of gas) but it did work the second time after I left it for on for a few minutes. I tried relighting the oven later in the evening all by itself and this time it worked. My wife told me that once time when it wouldn't light, there was an error code E-8. According to the manual that means I need to re-boot the oven. I'll try that and see if it corrects the problem long term. I've also searched this forum and found suggestions that it could be a weak igniter or possibly the gas valve assembly. If I need to buy a part, I want to make sure I don't buy an expensive part that's not necessary. Maybe the restarting (un-plug, re-plug) works or maybe it's a shout term solution. Where should I start so I can make sure I have an oven to use when I need it. Thanks. This forum has been a goldmine of info for all of my appliance repairs over the years.

-Scott Fuller

via Samsung FX710BGS/XAA Oven not heating up
by scottdfuller

Question for technicians - what brands have least service calls?

Looks like there are issues with almost all brands. Are there some that stand out with fewer repairs?
What brand and model would a technician buy?

Thanks
NCBaker

via Question for technicians - what brands have least service calls?
by NCBaker

Samsung Oven NX58J5600SGAA Preheat/Stead State Questions

I just wanted to sanity check my Samsung oven, which we bought 11 months ago. A few recipes came out a little under, so we bought a thermometer to hang on it. There was a 25 degree discrepancy, which we recalibrated. Here's an example:

Precalibration:
Set to 400
Preheat to 400
+10 minutes later, drop to 375. Stays that way for the next hour.

Post-calibration: +25 degrees
Set to 400
Preheats to 425 actual
+10 minutes, settles to 400 degress. Stays that way for the next hour.

Just wanted to sanity check that this is normal and the initial overage of 25 degrees isn't anything to be worried about.

Also, the preheat beep actually goes off about 5 minutes before it hits the target temp even though the thermostat says (for example) 400. So I'll set it to 400, it beeps ready and shows 400, but the independent thermometer will show 325 or so. Then if I wait 3-5 minutes, it goes all the way to 400 before doing the drop issue above.

This is under warranty for three more weeks, so I wasn't sure if I should have it looked at or if this is all pretty standard stuff.

via Samsung Oven NX58J5600SGAA Preheat/Stead State Questions
by bswb

Samsung FX710BGS Oven Won't Light

I've got a Samsung FX710BGS gas range and the oven won't light. I read through some of the similar issues on this forum and then I tried getting it lit by turning the oven on and then starting one of the burners. This didn't seem to work the first time I tried it (I was expecting to hear the whosh of gas, but a second time, I just left it for a few minutes and it seems to have started up. Can I pinpoint this to the igniter? Or is there still a possibility that it could be the gas valve or something else? Can you point me to the appropriate part to purchase to make this repair. This forum has never failed me in my many appliance repairs over the years.

Thanks.

-Scott Fuller

via Samsung FX710BGS Oven Won't Light
by scottdfuller

Anyway to identify model number with serial number?

I've taken apart an older Whirlpool Gas Stove and wanted to see if I could salvage some parts off from it. I can read the serial number just fine but the model number is completely gone. I was curious if there was a way to find the model number with the serial number? APL2101738

via Anyway to identify model number with serial number?
by BGT Masters of Tiki D

Electrolux EW30EF65GSB F10 hours after use

Hello.

I have an Electrolux EW30EF65GSB range. Lately its been displaying F10 error and beeping. What is weird is that it displays this error and beeps hours after use. We used an oven yesterday and it started beeping 24 hours later. Oven is not hot. I checked inside and there is no heat. its cool. Unplugging it and plugging it back into power fixes the issue.

Any ideas on how to fix this?


thank you

Alex

via Electrolux EW30EF65GSB F10 hours after use
by apal

Preheat/Stead State Questions

I just wanted to sanity check my Samsung oven, which we bought 11 months ago. A few recipes came out a little under, so we bought a thermometer to hang on it. There was a 25 degree discrepancy, which we recalibrated. Here's an example:

Precalibration:
Set to 400
Preheat to 400
+10 minutes later, drop to 375. Stays that way for the next hour.

Post-calibration: +25 degrees
Set to 400
Preheats to 425 actual
+10 minutes, settles to 400 degress. Stays that way for the next hour.

Just wanted to sanity check that this is normal and the initial overage of 25 degrees isn't anything to be worried about.

Also, the preheat beep actually goes off about 5 minutes before it hits the target temp even though the thermostat says (for example) 400. So I'll set it to 400, it beeps ready and shows 400, but the independent thermometer will show 325 or so. Then if I wait 3-5 minutes, it goes all the way to 400 before doing the drop issue above.

This is under warranty for three more weeks, so I wasn't sure if I should have it looked at or if this is all pretty standard stuff.

via Preheat/Stead State Questions
by bswb

Bosch HBN53R550B/46 - Main oven not holding temperature

Hi Guys, I have a bosch HBN53R550B/46 double under and the main oven does not appear to hold temperature. I have tried all the available settings to manipulate the elements in different ways but the result is always the same. Having placed a manual thermostat in the oven with 3d hot air selected I can see that the temperature can be somewhere between 25 to 50 degrees under the oven setting. I have replaced the thermostat with control wheel but it has made no difference. Is anyone aware of a way to calibrate this oven or have any further suggestions, really pulling my hair out now :wall::wall::wall:.... For reference the top oven is fine and tend to use this mostly now. Thanks in advance for the assistance.....

via Bosch HBN53R550B/46 - Main oven not holding temperature
by 4882rob

C272UB Thermador Oven element substitution

The element has burned out on my Thermador electric oven. Thermador no longer makes or carries the part, and I cannot find it anywhere online, after months of searching.

My question is this: can I substitute another element of the same or slightly lesser wattage? It is either that or throw away a $4,000.00 oven. I can drill a few additional holes for supports if needed.

Thanks in advance for your help!

via C272UB Thermador Oven element substitution
by Ads321